Paxton Novi 2000 ducting on 2000 Expedition 5.4
#1
Paxton Novi 2000 ducting on 2000 Expedition 5.4
Hi All,
I recently purchased a 2000 Expedition 5.4 with a Paxton Novi 2000 on it. It's a great truck with only 73K on it.
It drives fine but never seemed to have as much "go" as other Paxton-equipped trucks I've driven over the years.
Long story short, I cleaned the K&N filter and MAF this morning and was reinstalling the ducting and noticed that the elbow that connects onto the back of the S/C has a large split around the entire edge of the lip where the clamp goes.........I'm thinking this is why I'm losing boost, any input? See pictures below.
Now the big question......I know Paxton discontinued this kit for the 5.4 Fords awhile back. Anyone know of a source for the replacement elbow?
Thanks in advance
I recently purchased a 2000 Expedition 5.4 with a Paxton Novi 2000 on it. It's a great truck with only 73K on it.
It drives fine but never seemed to have as much "go" as other Paxton-equipped trucks I've driven over the years.
Long story short, I cleaned the K&N filter and MAF this morning and was reinstalling the ducting and noticed that the elbow that connects onto the back of the S/C has a large split around the entire edge of the lip where the clamp goes.........I'm thinking this is why I'm losing boost, any input? See pictures below.
Now the big question......I know Paxton discontinued this kit for the 5.4 Fords awhile back. Anyone know of a source for the replacement elbow?
Thanks in advance
#4
Thread
Thread Starter
Forum
Replies
Last Post