Hello folks..Been sneekin in looking up stuff for a while, but had to finally register to get this answer.

I have a 97 F150 4x4 4.6L with 8' bed will the transmission and transfer case from a 97 expedition 4x4 4.6L bolt and wire in with no mods?
linkage-front and rear shafts any difference at all?

I know the transmission is the same, both being:

AT 8-280 (4.6) 4R70W AODE-W 4X4 ID F75P-KA

Anyway..i found the expedition stuff fairly cheap and was wondering.
Thanks for your help