Rear Seats F250 '89
#2
If yours is anything like my '97, when the back seat is folded down it's a completely flat metal surface. There should be a seam in the center where the rear section overlaps the front. Pull up on that (the rear section), it should be the seat back. It should lock into the back wall of the cab. The bottom cushion is a "tumble and fold" type deal, where it flips 180* over the front hinges. Pull it straight up, snake the seatbelts through, and flip it all the way over and press firmly to latch it to the floor.
Yours could be different, but once you figure it out you'll be able to switch it around pretty quick. I love the folding back seat.
Yours could be different, but once you figure it out you'll be able to switch it around pretty quick. I love the folding back seat.
#3
If yours is anything like my '97, when the back seat is folded down it's a completely flat metal surface. There should be a seam in the center where the rear section overlaps the front. Pull up on that (the rear section), it should be the seat back. It should lock into the back wall of the cab. The bottom cushion is a "tumble and fold" type deal, where it flips 180* over the front hinges. Pull it straight up, snake the seatbelts through, and flip it all the way over and press firmly to latch it to the floor.
Yours could be different, but once you figure it out you'll be able to switch it around pretty quick. I love the folding back seat.
Yours could be different, but once you figure it out you'll be able to switch it around pretty quick. I love the folding back seat.
Big thanks, this was it, i was trying to pull the front part of it lol...
Thread
Thread Starter
Forum
Replies
Last Post