6.0 cooler fittings help
#1
6.0 cooler fittings help
Getting ready to do my trans and 6.0 cooler, just need to find the fittings needed. I know that BTS has a kit, however, I found this out after I had already purchased all new hoses and clamps. Now I just need the 90* barb to barb reducers. I found these 1/2 X 3/8 HOSE BARB ELBOW, not a bad price, it just sucks to almost pay the same in shipping. Just wondering if anyone new of a better place, maybe even someplace local to Sacramento or Bay Area California. Thanks for any help.
#2
Go to your local Parker Store... more fittings and hoses than you know what to do with, and not expensive, either. The link below will give you the Ca store location nearest you.
ParkerStore locations in CA & NV
ParkerStore locations in CA & NV
#4
I was in the same boat the other day, but didn't have time to order fittings, so I just made a 90* out of the stock hard line I cut off. Here's a pic from a thread I started about it the other day:
I've since double clamped the ones on the fittings made from the hard line, as they aren't flared.
Mark
I've since double clamped the ones on the fittings made from the hard line, as they aren't flared.
Mark
#5
Thread
Thread Starter
Forum
Replies
Last Post
Bigpipes 35
1999 to 2016 Super Duty
4
11-19-2011 11:11 PM
triskit16
1999 - 2003 7.3L Power Stroke Diesel
27
07-18-2010 10:23 PM
kawajockie
1999 - 2003 7.3L Power Stroke Diesel
17
06-19-2008 05:38 PM