This is prolly a 1 page thread at most
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,144
Received 3,995 Likes
on
1,600 Posts
Good morning, crew!
The snow is starting to melt here in sunny AZ!! LOL!! Yesterday, 102*F, 4% humidity, 9*F dewpoint, SW breeze, as long as I didn’t have to work, and could sit in the shade it was not too bad!!😎😎
Not much going on here right now, just the dogs and I enjoying life!
All have a great day! Later.
The snow is starting to melt here in sunny AZ!! LOL!! Yesterday, 102*F, 4% humidity, 9*F dewpoint, SW breeze, as long as I didn’t have to work, and could sit in the shade it was not too bad!!😎😎
Not much going on here right now, just the dogs and I enjoying life!
All have a great day! Later.
Join Date: Apr 2011
Location: Edmonton Alberta
Posts: 7,287
Likes: 0
Received 736 Likes
on
141 Posts
Thanks guys.
Here are a couple more pictures.
Trail leading to the tree fort. Hard to tell from the pictures but it is actually on a pretty steep hill.
When you get to the fort you go under it and up to a ladder on the left side
Looking straight down off the balcony. It is a ways down. Like I said, the hill is steeper than it looks lol
View from the balcony
Have a good day everyone!
Here are a couple more pictures.
Trail leading to the tree fort. Hard to tell from the pictures but it is actually on a pretty steep hill.
When you get to the fort you go under it and up to a ladder on the left side
Looking straight down off the balcony. It is a ways down. Like I said, the hill is steeper than it looks lol
View from the balcony
Have a good day everyone!
Good morning, crew!
The snow is starting to melt here in sunny AZ!! LOL!! Yesterday, 102*F, 4% humidity, 9*F dewpoint, SW breeze, as long as I didn’t have to work, and could sit in the shade it was not too bad!!😎😎
Not much going on here right now, just the dogs and I enjoying life!
All have a great day! Later.
The snow is starting to melt here in sunny AZ!! LOL!! Yesterday, 102*F, 4% humidity, 9*F dewpoint, SW breeze, as long as I didn’t have to work, and could sit in the shade it was not too bad!!😎😎
Not much going on here right now, just the dogs and I enjoying life!
All have a great day! Later.
Join Date: Apr 2011
Location: Edmonton Alberta
Posts: 7,287
Likes: 0
Received 736 Likes
on
141 Posts
Ya, it was not that easy but the location was too good to pass up.
Evening gentlemen. Been busy a few days and trying to catch up. On a sad note, last week during the heavy rains in the county next to mine, a teen jumped into the rushing waters near the dam on a nearby river and was swept away. A friend of his saw him go in and flagged down another teen to help, the two did NOT know each other, and the other teen(18&19) jumped in to try and help him. Our area Rescue, divers, Sheriff's Departments, DNR, Fire, Kayakers, Cadaver Dogs have been searching for the last 4 days and they were both found this morning around 11am. Such a sad time for the families, but it does bring them closure that they were found.
Still tinkering with the tune of the truck. Having a little trouble with a stubborn code, but it's not causing any harm. Hopefully she's ready to go Saturday morning.
Hoping everyone is doing fine?! Just checking in and looking around.
Still tinkering with the tune of the truck. Having a little trouble with a stubborn code, but it's not causing any harm. Hopefully she's ready to go Saturday morning.
Hoping everyone is doing fine?! Just checking in and looking around.
Join Date: Sep 2011
Location: Great Falls, Montana
Posts: 62,144
Received 3,995 Likes
on
1,600 Posts
Howdy my friends........
Thanks for all the get posts...... Nice photos and stories.
Up late tonight......
Here are some photos of the Montana 5th wheel work...... Insulating the underbelly..... repairs from factory sloppy work....(Can't call it poor workmanship, too chity for that)
Broken weld.....
Insulating the fresh water tank in the rear....
Insulating one gray tank and the black water tank
Cut from the factory.... Keystone workers are criminals...
Broken weld from the factory.....
Added the wood vertical member to make up for the factory damaged beam.....
Broken weld......
Thanks for all the get posts...... Nice photos and stories.
Up late tonight......
Here are some photos of the Montana 5th wheel work...... Insulating the underbelly..... repairs from factory sloppy work....(Can't call it poor workmanship, too chity for that)
Broken weld.....
Insulating the fresh water tank in the rear....
Insulating one gray tank and the black water tank
Cut from the factory.... Keystone workers are criminals...
Broken weld from the factory.....
Added the wood vertical member to make up for the factory damaged beam.....
Broken weld......
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,148
Received 5,160 Likes
on
1,689 Posts
Roy that's terrible! The workmanship is terrible under there! I can't believe all the crap you are finding. So glad you are getting that all sorted.
Owen's on a role. Last night at Scouts, he taught 7 Scouts Totin' Chip so they can learn about knife, saw and hatchet safety and earn the privilege to carry a pocket knife. It also gets Owena step closer to the Paul Bunyan Award. I stood by and added commentary when needed, but he did a great job. I was impressed.
Happy hump day guys!
Owen's on a role. Last night at Scouts, he taught 7 Scouts Totin' Chip so they can learn about knife, saw and hatchet safety and earn the privilege to carry a pocket knife. It also gets Owena step closer to the Paul Bunyan Award. I stood by and added commentary when needed, but he did a great job. I was impressed.
Happy hump day guys!