460 rod lenth
#1
460 rod lenth
so my 460 d1ve (i think its a 77) blew sky high last week so i tore it down to do a rebuild upon doing this i found that three of the connecting rods are shot. i just got a stripped down 71 D1ve from my buddie was wondering if i could use the rods out of that since they are just laying in my shed and i dont whant to build the 71 Ive heard some people say that the d1ve blocks have two different deck heights i don't think they do but its better to be safe then sorry so i thought i would ask if the rod lengths are the same
also i was wondering what the displacement of a 460 with .030 .060 and .080 over bore comes out to in cubic inches
also i was wondering what the displacement of a 460 with .030 .060 and .080 over bore comes out to in cubic inches
Thread
Thread Starter
Forum
Replies
Last Post
mikesisk
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
06-20-2011 12:06 AM
BBF250
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
02-23-2006 08:24 AM
gray79f250
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
01-16-2003 10:58 PM
jaimalade
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
14
10-31-2002 08:18 AM