Weather's getting nice, whatcha workin' on?
#1
Weather's getting nice, whatcha workin' on?
Even though we didn't really have a winter, the temps are finally up! Time to start wrenching again!
Here's what takes all my spare time (which isn't much, working seven days a week since January):
Drug it home last week. Been cleaning and painting, rewiring, and prepping for re-installing the motor. I need to get some more pics with all the work I've done.
Here's what takes all my spare time (which isn't much, working seven days a week since January):
Drug it home last week. Been cleaning and painting, rewiring, and prepping for re-installing the motor. I need to get some more pics with all the work I've done.
#2
#4
#5
#6
#7
Between 3 vehicles and my house and my job it seems the work is never done. Installed a new paver patio out back of my house as a second level to the concrete patio. Been slowly working on putting up all the privacy fence that my wife keeps gently reminding me was supposed to be done last summer (ooops) New fender flares on the f250 and just got new lower control arms in for the 'stang
Trending Topics
#8
You have to love that 7 day work week, just look in your lunch box to know where you are at, full you go to work, empty it is time to go home. I always loved the 77 high boy we had at work, Canadian build and it never died from rust like the other truck.
Inherited mowing the home place, 6 acres, from my sisters unanimous decision I have nothing to do. I use a front mount JD 935 diesel mower, 60 inch deck and tow a Swisher 60 inch mower, rebuilding another Swisher for a total 14' cut when done. With no rain this year I am doing good for getting this dumped into my lap.
Scattered the neighbors JD9500 combine across the shop, have 2 augers remaining to return from the machine shop receiving new flighting. After that a complete rebuild on the corn planter and have to pull the auger on a grain cart we picked up last year for new flighting.
Inherited mowing the home place, 6 acres, from my sisters unanimous decision I have nothing to do. I use a front mount JD 935 diesel mower, 60 inch deck and tow a Swisher 60 inch mower, rebuilding another Swisher for a total 14' cut when done. With no rain this year I am doing good for getting this dumped into my lap.
Scattered the neighbors JD9500 combine across the shop, have 2 augers remaining to return from the machine shop receiving new flighting. After that a complete rebuild on the corn planter and have to pull the auger on a grain cart we picked up last year for new flighting.
#9
#10
Got racing started, been to couple races now. Finished friends car up finally(after 18 yrs) and he is joining the racing scene again.
Got a few projects going in the garage. Front end on '64 Galaxie, rear suspension project on '69 F100. It's always sumthin.
If all else fails..........hop on the bad motor scooter and RIDE!!!!
Got a few projects going in the garage. Front end on '64 Galaxie, rear suspension project on '69 F100. It's always sumthin.
If all else fails..........hop on the bad motor scooter and RIDE!!!!
#11
#12
I travel around NE Ohio for the most part. Thompson, Quakercity, Magnolia, National Trails, Pacemakers.
Here is the group I run with:
UMTRNorth.com - 100% Stick Shift Drag Racing -- Wheel standing, high winding, manual transmission drag racing in Ohio, Pennsylvania, and Michigan
Here is the group I run with:
UMTRNorth.com - 100% Stick Shift Drag Racing -- Wheel standing, high winding, manual transmission drag racing in Ohio, Pennsylvania, and Michigan
Thread
Thread Starter
Forum
Replies
Last Post
Aus56
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
09-25-2012 11:41 PM
thordehr
1999 - 2003 7.3L Power Stroke Diesel
13
04-23-2012 07:40 AM
Drewski 2
1948 - 1956 F1, F100 & Larger F-Series Trucks
15
07-17-2011 10:43 AM
2dasand
1948 - 1956 F1, F100 & Larger F-Series Trucks
8
05-11-2011 09:10 AM
create
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
09-29-2009 11:40 AM