Well, I'm installing an "S" series turbo on my truck using Irate's mount as recommended by several to me.

My question is what have those of you with H2E or S366/S468/S471 turbos done with the Wastegate Solenoid that was attached to the stock intake manifold?

Unplug and delete? Keep plugged in and plug the green and red vacuum lines????

Any help is appreciated.

Thanks,
Ryan

 

I deleted the lines and all. I put a 470 ohm resistor in the plug. There is an album in my gallery that shows it.

 

So that will eliminate the soft code that throws when unplugged?

 

i left the sensor on there and plugged the 2 little holes.....

 

I don't get any.

 

Worked for me also.

 

Ed "Baddogkuzz" told me about this and gave me one of his extra 470 ohm resistors but still have to install it and ck with AE.