My Neutral Safety Switch round 4 pin harness only has 1 wire connected The rest has corroded,

Wire Colors on the gray male connector are
yellow/orange
red/green
purple/orange
black/yellow

Black Female connector are
red/blue
red/blue
purple/orange
black/purple

The only that i know for sure is the black/yellow and black/purple are the same

I can put my own connector in, i just need to know which wire goes where

Thanks in advance
Mike

 

I added a picture, this is the harness i need to replace, between the truck harness, and the harness that plugs into the switch on the transmission