BTY were did you mount the camera, i'm looking for a simular solution.
thanks.

 

I like it, I also tow a gooseneck I have an adapter on my fifthwheel toybox to gooseneck
Love not having to move an hitch in/out of the bed of the truck.
What I have done is I mounted the camera from a license bracket camera to an magnet and attached it to the front bed rail looking back at the hitch. mine is wired not wireless but its powered by the powerpoint on the dash.

 

I used some short 1x4 3 shelf brackets,put a Peice of tin so camera will stick, and can move it up and down.since I have a Bak flip I could not see anything. Now 1 st shot and I'm done.

 

Since I have an EDGE CTS, (which also displays back up images) I ran a wire from it to the bed. Put a camera in the bed, mine is to the side of the hitch on the side of the bed under the rail) and it has a plug, Once hitched up, I move the plug over and connect it to my trailer camera that wire is hanging from the Gooseneck. Then I can back up my horse trailer and see what I'm running over.

 

I have the CTS as well I just couldn't find a camera that I thought would be suitable with CTS. Since cameras I'm not that smart on what to look for.