flathead fan pulley
#1
flathead fan pulley
Have a wide belt flathead fan pully almost ready to go on the engine. My question is if there is supposed to be a bushing/seal around the shaft pictured. The pulley has a screw in the pulley I assume for adding lubricant. Seems without a bushing would make it rather porous. Any help, insight is appreciated.
TerryC
TerryC
#2
There is a thread on rebuilding this. I believe it takes 1 oz. of 30 wt. then drain no seal on the back. here's the link
https://www.ford-trucks.com/forums/1...b-rebuild.html
https://www.ford-trucks.com/forums/1...b-rebuild.html
#5
Thread
Thread Starter
Forum
Replies
Last Post
farmall_7
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
05-18-2016 12:52 PM
restoringmy46
1948 - 1956 F1, F100 & Larger F-Series Trucks
6
04-25-2007 08:07 AM
Rocking M
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
05-03-2002 01:34 AM