boss9f100 Projects page
#108
I have been busy trying to figure out how to proceed!
'66 Cab is now gutted with floor and firewall gone. The new frame I ordered came in yesterday along with new rear axle parts. More parts still on order.
it keeps getting more and more complicated but pushing on.
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/69c825eb.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/846bf04f.jpg">
<br/><br/>
</center>
The new frame looks horrible as all faded out so will have to re-do that now.
Still working on solving the issue's at hand.
Now on youtube
http://www.youtube.com/watch?v=ZxDpueyyJV4
'66 Cab is now gutted with floor and firewall gone. The new frame I ordered came in yesterday along with new rear axle parts. More parts still on order.
it keeps getting more and more complicated but pushing on.
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/69c825eb.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/846bf04f.jpg">
<br/><br/>
</center>
The new frame looks horrible as all faded out so will have to re-do that now.
Still working on solving the issue's at hand.
Now on youtube
http://www.youtube.com/watch?v=ZxDpueyyJV4
#110
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Chassis%20%20Drivetrain/6a8909cf.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Chassis%20%20Drivetrain/bcb1070b.jpg">
<br/><br/>
</center>
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/5af8acd6.jpg">
<br/><br/>
</center>
Cab opening is 41" Frame is 45"+
#111
too late to turn back now . . . . . . .
Chopped up the back of cab so it fits EcoBoost frame!
Looks like it will work out well, it will take a pretty sharp eye to for someone to know it was even done.
It was nice to see NO rust in this area. Nice and SOLID!
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/b850282c.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/48e124d0.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/5af8acd6.jpg">
<br/><br/>
</center>
Looks like it will work out well, it will take a pretty sharp eye to for someone to know it was even done.
It was nice to see NO rust in this area. Nice and SOLID!
<center>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/b850282c.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/48e124d0.jpg"><br/><br/>
<img src="http://img.photobucket.com/albums/v513/CalypsoCoralBoss302/1966%20F250%20352%20Red%20Red/Body_Paint/5af8acd6.jpg">
<br/><br/>
</center>
#112
Someone sent me a PM asking about what spot weld cutters I use so thought I would share that.
IMO I think Blair has the best ones on market.
I have gotten 225+ spot welds with a single cutter.
The 13224 is one I have used most and very reasonable priced.
I also recently bought a Rotabroach style cutter and they work even better its just that care has to be taken not to let it catch as they will like anything else break.
Blair Spotweld Cutters
For less than 30.00 buy a USA made cutter that will last you a lifetime.
Spotweld Cutters
IMO I think Blair has the best ones on market.
I have gotten 225+ spot welds with a single cutter.
The 13224 is one I have used most and very reasonable priced.
I also recently bought a Rotabroach style cutter and they work even better its just that care has to be taken not to let it catch as they will like anything else break.
Blair Spotweld Cutters
For less than 30.00 buy a USA made cutter that will last you a lifetime.
Spotweld Cutters
#114
So how did you know I made a build here on FTE? We have had 100+ for a couple days here already. Had to move things in the cramped garage so we had the A/C blowing on us. Everything was too hot to even touch outside.
This has a been a neat project so far.
If you get bored there in Finland here are a few more Video's to check out. Hoping to get going on the Orange truck in between things, to at least get it running.
http://www.youtube.com/user/backyardResto/videos
Are you still planning on Diesel school with Ford when you come back to AZ?
#115
#116
Hi Ben! Your dad stopped by for a few minutes yesterday morning so I could do some welding on the jeep. He ended up staying for the entire day helping me out on this project! Some of this heavy stuff is just too much for a old fart like me. It was great to have the help . . .
So how did you know I made a build here on FTE? We have had 100+ for a couple days here already. Had to move things in the cramped garage so we had the A/C blowing on us. Everything was too hot to even touch outside.
This has a been a neat project so far.
If you get bored there in Finland here are a few more Video's to check out. Hoping to get going on the Orange truck in between things, to at least get it running.
http://www.youtube.com/user/backyardResto/videos
Are you still planning on Diesel school with Ford when you come back to AZ?
So how did you know I made a build here on FTE? We have had 100+ for a couple days here already. Had to move things in the cramped garage so we had the A/C blowing on us. Everything was too hot to even touch outside.
This has a been a neat project so far.
If you get bored there in Finland here are a few more Video's to check out. Hoping to get going on the Orange truck in between things, to at least get it running.
http://www.youtube.com/user/backyardResto/videos
Are you still planning on Diesel school with Ford when you come back to AZ?
I'm still debating if I want to go through that school, or come back here to Finland and do industrial diesel mechanic here.. It's free here
But I can't wait to see what you have at your house when I get back! Great to see you're still doing challenging projects! I'll make sure to watch your videos! I'd love to do my own build with your help someday! Maybe when I get back!
#117
And a quick thought, instead of incorporating the '11 dash in the '66, couldn't you pull the column out, and then put the 11 column in with some modifications? And then you could custom modify a NAV unit, and a/c.. Just pop the 66 dash out a little bit for more room..
Or would that not work at all?
Or would that not work at all?
#119
I'm planning on it. And I posted about it on an f150 forum I'm on, and a guy did a quick google search and sent me the link! So I decided to join the forum and watch the build
I'm still debating if I want to go through that school, or come back here to Finland and do industrial diesel mechanic here.. It's free here
But I can't wait to see what you have at your house when I get back! Great to see you're still doing challenging projects! I'll make sure to watch your videos! I'd love to do my own build with your help someday! Maybe when I get back!
I'm still debating if I want to go through that school, or come back here to Finland and do industrial diesel mechanic here.. It's free here
But I can't wait to see what you have at your house when I get back! Great to see you're still doing challenging projects! I'll make sure to watch your videos! I'd love to do my own build with your help someday! Maybe when I get back!