My 42' restoration! - back to the good old days!
#63
#64
#65
I had a bit more chance to work on the engine today and yesterday, I'll let the pics do the talking!
After the block was stripped of its ancillaries, I thought I'd start cleaning bits up! First up was the intake manifold -
If you look closely, you'll see the fuel pump tower (left) is bent, I don't know how of why but I've managed to get it straight (ER) but I'm gonna have to look out for a new one!! It doubles as the oil filler stalk too, so it needs a good seal or it'll **** oil everywhere! Which isn't good!
The girlfriend even came round, and she's taken the intake in as a personal task! I think I'll let her do it from start to finish, including paint so she can see what a Nightmare it is to restore this stuff!
And this is one of the fuel pipes, ill get an after shot tomorrow!
After the block was stripped of its ancillaries, I thought I'd start cleaning bits up! First up was the intake manifold -
If you look closely, you'll see the fuel pump tower (left) is bent, I don't know how of why but I've managed to get it straight (ER) but I'm gonna have to look out for a new one!! It doubles as the oil filler stalk too, so it needs a good seal or it'll **** oil everywhere! Which isn't good!
The girlfriend even came round, and she's taken the intake in as a personal task! I think I'll let her do it from start to finish, including paint so she can see what a Nightmare it is to restore this stuff!
And this is one of the fuel pipes, ill get an after shot tomorrow!
#69
#70
I'm sorry i've been neglecting you all of updates!
Had a little free time, so took a little trip to the engine shop to sneak a peek!
The crank -
And a close up of one section! No score marks or any sign of wear! -
And the underside and inside of the block -
You can see the cam there, inside the block! None of this OHC stuff
And here's one of the bores! This is the worst of all of the 8 -
When I got back I started refurbish more stuff! Starting with the coil bracket -
Found a little crack in it! So will have to bust the welder out tomorrow!
Had a little free time, so took a little trip to the engine shop to sneak a peek!
The crank -
And a close up of one section! No score marks or any sign of wear! -
And the underside and inside of the block -
You can see the cam there, inside the block! None of this OHC stuff
And here's one of the bores! This is the worst of all of the 8 -
When I got back I started refurbish more stuff! Starting with the coil bracket -
Found a little crack in it! So will have to bust the welder out tomorrow!
#74
Thread
Thread Starter
Forum
Replies
Last Post