Well, I've shot an email with this thread link, and one from another site off to them, to show that there is defintively a market for these. We'll see what they have to say.

 

That's a way to do your job as Chapter Leader....
I'll tell your boss her on FTE the you did at least one good deed this quarter..

 

I was under both of my 68's today and the 2WD needs both inners and outers. The 4WD inners are just starting to go.

 

I definitely need a set.

 

having to build from scratch. got all the rust out of truck and the corners are a beach! media blasting is a good thing. figured I just jump in on this due to recent problems and upgrades. Lots of work and still not totally satisfied with what I did, can always be better.

 

I would have bought them as I made my own when I replaced the outers,MY thinking is they would sell the inners and outers as sets.

 

Any response from them yet.

 

Nope, still waiting. I know it takes a few days for them to respond.

 

I'd gladly buy a set for my '66. Not looking forward to fabricating them.

 

Its amazing that so many of these trucks have this issue and there is not a replacement panel for them... That was going to be my next spot to fix...

 

I found this in the LMC catalog... Is this not it? #14...

 

Those are the OUTER panels, not the inner........

 

It wouldn't hurt any to put new ones on mine as I know the corners aren't in need...yet...but I would be willing to help also

 

I'm surprised none of you guys have drifted off through the Mac's catalog as they have the rear cab lower corners your all looking for., for $25 bucks each on page 70.. You got a do more home work to get your projects finished ....my 2cents
orich

 

Are you talking the outer corners? Those are available from several sites. What I'm talking about, is the inner panel, that attaches to the out corners, and the inner cab floor.