This was a neat idea, thanks again to whoever suggested this!

Last month's will be unstuck and closed.

Post your wants & needs here, even if they were on last month's list; there's enough chatter on the old one it gets hard to know if somebody is still needing a part or not without reading through the entire thing.

Please keep monetary-transaction talk amongst yourselves - in PMs or e-mail.

It's fine if we want to give/sell things to each other but we can't be running a Flea Market or Auction House here, that's against the spirit of what we do here - people helping each other.

You might also check out the 80-86 Truck Parts - Free to a good home thread.

-chris

 

Hey guys still looking for a fuel tank selector valve. It's the 3 port version for a carb'd 300 straight 6, 1985 F150.

 

Yes I would love to own that harness, I still cant email you ( I am assuming my lack of posts as I click your name with no email option) My email is teamlovett80@nctc.com thanks in advance. I need that harness.

 

Items I'm looking for:

1) 13-56 T-case w/ slip yoke output. (I know it's not OEM 80-86, in case
anyone has one or sees one) This is for a project to install a US Gear Dual
Range aft of the t-case

2) Tan interior parts for a standard cab truck. Especially door panels, dash,
headliner & trim.

3) Seats and center console out of a bronco, also tan. Eventually I want to convert the bench seat to
bronco type buckets.

Thanks,
~John

 

Hey guys I'm looking for the factory cup holder that goes on the bench seat from an extended cab truck. I cannot find one at my junkyard(s) anywhere. I think the seat in my truck is from 87+, can't remember exactly what model I pulled the seat from.

Thanks In Advance!

 

Looking for a couple of things, a set of 87-91 F350 fender emblems and a 93-97 cruise control throttle cable for a 460.
Thanks,

 

What color?

I had a red one sitting outside for years, I haven't checked on it in a while. It may be damaged by now.

 

Any color will work, I can easily paint it, so long as it is good shape.

 

jaluhn,

I have a tan console from a 1985 Bronco. Since you have too few posts to be able to PM, email me: dnbranscomb@gmail.com

 

Still on the lookout for 1980-1981 351M or 400 engine mount perches.

If you know of a set, I would be glad to return the favor on an item you're interested in of near equal value.

 

Hey guys, I got a 81 f100 the other week, and when I tried to rotate the tires around I realized I have the wrong rear-end on my truck. A previous owner obviously swaped it out. What I have is a 9" rear with 5x5.5 lug pattern, which was an option for this truck, just not mine. I have 5x4.5 lug pattern on the front. Anyways, I'm looking for a complete rear-end with the 5x4.5 pattern. Would be willing to buy or trade you my Ford 9".

 

For a shortbed 4x4 1982 F-150 xlt with twin fuel doors? Color is not important, as I can paint it Ford Tan! My old truck has had a hard life & the bed bore the brunt of it... yet, it,s rebuilt engine barely has 50K miles & it is our family workhorse that towes our boat & hauls harvested big game home each hunting season. (Pop's 1982 longbed 2wd, twin fuel tank p/up is more "for show now" that it has been restored)! My poor old "warhorse" is the one that does all our familys dirty jobs since it has been a "lowley work truck" since 1993! My "Crusher" is likely the toughest truck I will ever own & now, whenever the snowplows are too lazy to do their job, I use it instead of my Toyota to get us around!

 

i have a 1995 ford f-350 crew cab 4x4 ext. bed 5.8 motor automatic i have a 2 piece drive shaft i need the rear part of the drive shft ....im currently runnon on my 4x4 front..... willin to trave 250 miles either way from wilmington delaware unless next day shippin can be arranged please help ive checked yard after yard after yard no dice ebay guy diont even have it out of Oregon

 

Personally, I would keep the rear end and try to find a way to convert the front to the same pattern as the rear.

 

I seriously thought about it, but its geared way to low. Over revving my 300 to stay at highway speed.