I cant seam to find a hermonic balancer for my 59 f100 292 does any one know were i can get one. also does any one know what kind of gaskets that mac sells and has any one ised them

 

Do you need one like this. Ford truck F100 292 damper balancer 1955 56 57 58 59 60 61 62 63 64 Mercury 312 | eBay
It is kind of spendy

 

Try damper doctor.com

 

They are available after market for big bucks. Your best bet would be a junk yard. You might end up with a couple of other goodies as well if you can find a yard with what you need. Junkyard trips are a good time!

 

were can you get them rebuilt

 

They also rebuild: Damper Doctor Online: Ford

 

i found one for a 57 car what will be the differece

 

FOR-2921, FOR-2922, FOR-2923 are three I found. If NumberDummy comes along he'll give you the correct part number and probably where to find one.

 

so a C3TZ-6312-E wont work

 

This part is for a 63' truck!

 

(sigh) No, it is not only for a 1963 truck!

C3TZ-6312-E (replaced: B5AZ-6312-B & B7AZ-6312-A) .. Harmonic Balancer-Single Sheave Pulley / 6 3/8" O.D. / 6 1/4" damper / 4 1/2" long / Obsolete

Applications: 1956/58 F100/700 272 / 1957/63 F100/700 292 / 1957/58 C Series Tilt Cab 272 / 1957/63 C Series Tilt Cab 292 / 1956/58 B500/600 272 / 1957/63 B500/600 292 (B = School Bus).

1955/57 Ford Passenger Cars 272/292/312 (except T-Bird and except 1957 312 with dual quads or SuperCharger) / 1958/59 Ford Passenger Cars 292.

GRIESEL MOTOR CO. in Okarche OK has ONE = 405-263-7242.

COLLECTORS AUTO SUPPLY in Oroville WA has ONE = 800-414-4462.

You should not go by part number prefixes to ID the year a part fits, or the vehicle it may fit, you wanna know why?

Because: FoMoCo is in-famous for replacing/updating 10's of 1000's of part numbers EVERY YEAR!!!

 

thanks alot i orderd one from macs but i have a filling its goona be wrong