Category: Engine - Intake/Fuel
Price: $85
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): S2000
Item Condition: CO
Shipping Information: Item can be shipped
Engine: Part suitable for gas truck

I have a K&N intake with filter for the 87-91 f150's with 4.9/5.0/5.8 engine without MAF. It was only on the truck for 1 year and then removed because I did the MAF swap and am running an HO mustang intake. It has been sitting in my garage for a few months now and is a little dirty but will be cleaned upon shipment. Clamps and sleeves are all there and the only thing needed would be a couple nuts and bolts and a small L bracket to mount the heat shield in place of the factory air box. Filter is in good shape as well as the tube and only needs cleaning. $85 shipped in the 48 states only and payment via paypal only. I have great feedback itrader ratings on other forums. I sell mostly car audio equipment so I am on caraudioclassifieds.org as thumper21 and caraudio.com/forum as tnt_sounds also ebay member 719travis_18.

No trades

 

Does this only fit up to 91? Thx

 

I believe it would work on any year as long as it is an SD engine and not a MAF. Maf was introduced in 95? I think? MAF truck would require the tube to be cut and sleeves made for it to be compatable.

 

also have 87-96 f150 progressive rate moog coil springs. Not sure on the exact number but I could probably find out. Springs where on for maybe 1 month before front end conversion/.

And a set of 87-91 clear corner lights brand new.

Txt 719-320-8412

serious offers only

 

looking for 80-86 parts

 

dont have any parts for that year

 

Bump still have the intake and coil springs

 

how would the intake work with my set up mine has dual hoses yours has single. what are the coil springs like what is the heiht of them are the 4-4 leveling springs or what.