code readout
Senior User
Joined: Nov 2002
Posts: 158
Likes: 0
From: Champlin USA
code readout
[updated:LAST EDITED ON 15-Nov-02 AT 04:54 PM (EST)]well here's what my book says for code 34 considering you have an EEC4 computer:
EGR Valve Position (EVP) sensor or Pressure Feedback EGR (PFE) sensor: signal voltage out of Self-Test specification limits,
or,
signal voltage above closed limit during normal engine run operation,
or,
signal indicates insufficient EGR flow
hope that helps!
i also have an 89 F150 with the 5.8L. it didnt idle right before i rebuilt it and it still doesnt after. its not a smooth idle by any means, prob why both motor mounts were cracked through. i long for the days without computers controlling things for us!!! prob a bad design on Fords part
EGR Valve Position (EVP) sensor or Pressure Feedback EGR (PFE) sensor: signal voltage out of Self-Test specification limits,
or,
signal voltage above closed limit during normal engine run operation,
or,
signal indicates insufficient EGR flow
hope that helps!
i also have an 89 F150 with the 5.8L. it didnt idle right before i rebuilt it and it still doesnt after. its not a smooth idle by any means, prob why both motor mounts were cracked through. i long for the days without computers controlling things for us!!! prob a bad design on Fords part
Thread
Thread Starter
Forum
Replies
Last Post
92will
Clutch, Transmission, Differential, Axle & Transfer Case
3
Jul 28, 2011 08:28 PM
rdunagan
6.0L Power Stroke Diesel
2
May 15, 2011 09:12 AM
nobodyspecial
1987 - 1996 F150 & Larger F-Series Trucks
18
Feb 3, 2007 10:05 AM
mtgrzlyman
1999 - 2003 7.3L Power Stroke Diesel
4
Apr 1, 2006 01:14 PM
