C bushings
Thread Starter
|
New User
Joined: Oct 2011
Posts: 2
Likes: 0
C bushings
I own an Australian built 1977 4wd f100 how do you determine the offset angle, the bushings I purchased do not seem to fit properly and trying to bolt the radius arm and caps together is not happening at all, replies here are good or email me at galliano61@gmail.com would be fine also
Cheers Rob
Cheers Rob
Last edited by diverdan 1961; Oct 16, 2011 at 03:41 AM. Reason: being polite
Senior User
Joined: Jul 2003
Posts: 425
Likes: 3
Who did you get the bushings from and what is the part number? Do you have a lift? I think they recommend 2 degrees for stock height, with increasing degrees of offset as your lift height increases. When I installed mine they looked like they wouldn't fit until I bolted everything up, I used poly bushings and they fit very tight...
Thread
Thread Starter
Forum
Replies
Last Post
jniolon
1948 - 1956 F1, F100 & Larger F-Series Trucks
2
May 19, 2010 11:17 PM
Fomhoire
Brakes, Steering, Suspension, Tires, & Wheels
2
Feb 19, 2006 01:04 PM
Fomhoire
1983 - 2012 Ranger & B-Series
2
Feb 19, 2006 10:59 AM
