Axle find

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2011 | 10:31 PM

jjurva

Thread Starter

Junior User

Joined: Aug 2011

Posts: 97

Likes: 0

Axle find

The rear axle snapped on my 1960 f100 4x4 truck. Where can I find another. It snapped right to the left of the differential

Oct 16, 2011 | 04:44 PM

Scot

Laughing Gas

Joined: Nov 1999

Posts: 954

Likes: 2

From: 15 miles west of Venus

If it is a standard 9" it should be the same '57-'72. Left and right are the same.

Oct 18, 2011 | 08:01 PM

NumberDummy

Ford Parts Specialist

Joined: Nov 2006

Posts: 88,826

Likes: 784

From: Simi Valley, CA

Quote:

Originally Posted by Scot

If it is a standard 9" it should be the same '57-'72.

Left and right are the same.

B7TZ-4234-A (replaced B7C-4234-A) .. R/L Axleshaft-28 splines / Obsolete

Applications: 1957/67 F100 w/a 9" rear axle / No Ford Dealer or obsolete parts vendor has any.
-------------------------------------------------------------------------------------------
1968/72 F100 is not the same, because these trucks have 2 1/4" rear brakes, and...

There are two different 1968/72 F100 9" axleshafts...because...there are two different 9" rear axles.

One has 28 splines, the other has a 9 3/8" ring gear, 31 spline axleshafts and Traction-Lok. Only FIVE parts are the same as a 9 inch.

One pinion bearing, one pinion bearing cup, pilot bearing retainer, pinion seal & housing gasket. EVERYTHING else is different.