Just got a surprise package from ups. Auto enginuity with enhanced ford. Don't have a clue how to use it but if anyone is in north central Illinois, just south of hwy 80 and needs to hook there truck up I can help. I also have a question. I read somewhere that I may be able to readjust my speedometer with this? My spedo seems to have been adjusted to a larger tire size. At 55( on my gps) my spedo and auto enginuity both read 5 mph faster. Anyone know how to recalibrate the spedo? Any help or tips would be greatly appreciated. Thank You

 

AE will allow you to adjust the speedo for different tires, there is a post that had good step by step instructions. I'll see if I can search it out.

 

Changing tire size using AE

After the pcm logs on you will get the vehicle selection box. When it opens go to the bottom where it says System.

It should already say enhanced power train Click the drop down arrow and change it to anti lock brake then click on ok.

After the truck connects click on the test on board system tab. Click the drop down tab next to the initiate button and select
tire size.

When that opens there will be a left and right arrow on the far right next to the initiate button. Click the right arrow
to get a bigger tire.

 

Helifixer has faster fingers than my search and has you covered.

 

Here's some AE help.
https://sites.google.com/site/woodnt.../autoenginuity

 

Thank You sir that seemed to work just need to go for a test drive to see for sure. Thanks again!