When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey Liljim. Been a few years since you made this thread, but Im having the same issue with my gt gas. Lost the files. If you still have them(I'm willing to pay) could you send them to cargeek123@hotmail.com
I hope I don't have issues!! I just bought a 2010 V10 and was planning on getting mikes tunes installed in a bullydog platinum GT that I already have! I drove a V10 with that same setup and was impressed
Thank you for recommendation ddbck! Glad to know you are enjoying your tunes!
I'm new to the forum and have never messed with performance tuning on my '16 truck therefore know nothing about it. I have looked into the Super Chip, Bully Dog, etc. but never pursued it. What would I have to do if I wanted to add more power/ torque for towing with 5 Star Tuning? Would I need to buy one of those tuners that plugs into the OBD2 ports? I have the 2.7L EB engine and do moderate towing with my hot rods. Thanks
I'm new to the forum and have never messed with performance tuning on my '16 truck therefore know nothing about it. I have looked into the Super Chip, Bully Dog, etc. but never pursued it. What would I have to do if I wanted to add more power/ torque for towing with 5 Star Tuning? Would I need to buy one of those tuners that plugs into the OBD2 ports? I have the 2.7L EB engine and do moderate towing with my hot rods. Thanks
If you're local we can flash your vehicle directly. If you're not near our location we can get you setup with an SCT/Bully Dog tuner for your vehicle. Once flashed you won't need to leave the unit plugged in unless you wish to monitor the vehicle. Great all around platform and it has a ton of untapped potential.
Hi...i am a new user here. In my case when I try to install download as a f150 it goes as far as "turn key to run position" and thats it.Truck won't start if you turn to what I assume is the run position.any help wounld be appreciated.unlike my last post I can't figure this out on my own and bully dog has the worst tech support I have ever seen or "not" heard from.