Trying to identify the transmission we got from the scrap yard a few years ago. They claimed it was out of a 1986 F150 Vin No. 1FTDF15Y9GNA60912, if I can read their writing right. The tag on the trans reads as follows:

E3TA7003 UA FE 35
10 21 86 435

The trans is good and I may want to offer it for sale in the Classifides if I can be sure what it is. I looked in all the posts and lists I can find but there is no mention of this one. It a 4 speed manual with granny low. Thanks for any help.

 

A four speed granny low is either a T-18 or an NP435. I'm going to go with NP435 on this one because of the last three digits you posted.

 

T18 has a cast iron top, NP435 has an aluminum top.

 

You guys are fast. It has an aluminum top and the scrap yard receipt says N.P. 435 down in the corner. Must be the New Process 435. Thanks again.