Last trip out before I get the suspension done. Sky Manufacturing shackle reversal, custom Atlas leafsprings and some nice shocks, not sure if I am going with Icon or Fox.

 

I copied this from the OTHER thread...

This is my CURRENT 95 F150...This is actually my 3rd truck spec'd this way... 95 F150, extended cab, short bed, 5.8L, auto, 4x4. I picked it up in the spring, after selling my Rover. It needs a little love and attention, but is still in pretty good shape... I wouldn't mind lifting it and a few other things. Just got finished swapping in a new rear end last week.





This was my FIRST 95 F150. I still regret selling it. 4" suspension / 2" body lift. 15x10 American Racing Wheels, 35x12.50s, custom bent cat back duals, all original paint (Sapphire Blue & Light Opal), upgraded audio




This was my SECOND 95 f150... a 95 Eddie Bauer. It ended up in Ohio, i think.




then prior to the trucks... I had a 92 Bronco. I think I had the top held on with about 5 bolts, so I could take it off quickly

 

Now that I know how to post pics the right way i'll throw my before and after pics out there.
Bought this 96' F150 single cab shortbed 4x4 in may 2012


this is what I accomplished by November 2012

 

I posted in the other...might as well jump in here also.

95 F350 PS. Bought as a 2x and converted. 53,000 miles. SD Inter cooler,Edge CTS,5" exhaust,Baumann TCS controlled E4OD.10" lift,Xover steering,4.88 gears,Detroit Locker...more,more...



Short vid of the 350 getting wet:

<iframe src="//www.youtube.com/embed/AXyhXetkE78?feature=player_detailpage" allowfullscreen="" frameborder="0" height="360" width="640"></iframe>

95 Lightning. DJM beams,Belltech springs,rear axle flip on reg F150 springs,frame notch,minitub. 17X8 and 17X13 Bogarts,390 M&H DR.

 

 

Nice Trucks! I got the Sky's Shackle Reversal and Atlas Springs done but still looking for shocks. Even with emulsion shocks, the suspension rides SO NICE now!

 

Nice tape job! Looks great.

 

Cool tape job. I did the same to mine. Never thought about going around the heater controls.

 

My 94 f150 with a 4.9 has 33x12.50 tires, bumper has been extended out two inches dual exhaust ......lots of future plans

 

My '96 4x4 F150 with the 5.8! Going to put leveling front springs on it soon and get 32" mudders!

 

Thanks, yea I put a full piece of tape around the control pod and then cut the excess of with a razor blade. It took some work to get around the corners lol

97 PSD on the left and 93 7.3IDI on the right. Both on 35s.



The 95 351w with the camo interior

 

I love that color ......nice looking truck

 

Some updated Pics of my '95...True Dual Stainless Exhaust w/ High Flow Cats & DynoMax Race Bullet Mufflers

 

There are a lot of really good looking trucks in this thread! I'm currently in the market for one of my own, and I look forward to posting pics when I finally get it!

 

How do you like them dynomaxes? Can you put up a sound clip please!?