ok, how much should the IP go up when the turbo is installed?

 

First install a probe and gauge to monitor EGTs. Then bump the pump up gradually by one flat (1/6) turn on the screw. Keep EGT's below 1150*F.

 

how do i do that? turbos are new to me.

 

Look at page six - http://assets.bankspower.com/manuals...310-v3-web.pdf

 

were you asking how to monitor the egt's or how to turn up the fuel?

 

I thought he was wondering how to turn the fuel up. Monitoring EGT's is simply looking at the gauge so I doubt he was asking 'bout that.

 

So just letting it idle or do i want to be putting a load on the engine?

 

now i am just confused!

 

when i am monitoring the EGT, just let it idle when monitoring this or when im driving down the road watching the gauge?

 

eh screw it lol, i think im just going to have the Diesel Shop do it lol.

 

Are you asking how to install egt gauge in manifold?

 

Thats what ive been asking lol and the Fuel pump, just those two things.

 

https://www.ford-trucks.com/forums/7...bo-diesel.html

"Fuel injection pump adjustment article"

 

so if my truck is not turbo charged yet and i want to turn the fuel up and i want to put a pyro on it. Do i just drill a hole in the exhaust manifold?

 

yeah man haveing a turbo wont change where you put the probe in at... to test the EGTs on it you want to put a big load in the bed or pull a heavy trailer up a steep hill at full throttle to see how high the EGTs go... Thats the hottest your engine will get