2004 - 2008 F150 2004, 2005, 2006, 2007 and 2008 Ford F150's with 5.4 V8, 4.6 V8 engine
Sponsored by:
Sponsored by:

fail safe mode and engine cutting out at high rpms

Thread Tools
 
Search this Thread
 
  #1  
Old 01-11-2011, 01:43 PM
2005ford89's Avatar
2005ford89
2005ford89 is offline
New User
Thread Starter
Join Date: Jan 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
fail safe mode and engine cutting out at high rpms

ok I have 2005 Ford F150 with the 5.4 the other day i went to pass a truck and floored it and it fell on its face cut out real bad like an injector or a fuel pump but then when its cold outside a fail safe mode message appears and the truck dies ill start it back up and theres no engine light on.. it didnt store a code the dealership said nothing is wrong but everytime u accerlate fast it cuts out and thats not normal fuel filter is replaced every 4thousand miles did pressure test on pump its fine theres 84,000 miles on the truck any suggestions? besides injectors
 
  #2  
Old 01-11-2011, 03:35 PM
Sako 75's Avatar
Sako 75
Sako 75 is offline
Senior User
Join Date: Jan 2009
Location: Top Of The World, TN
Posts: 328
Likes: 0
Received 0 Likes on 0 Posts
Sounds like a sticking throttle body assembly. PCM should hold a soft code for three drive cycles after the CEL goes out. Get your codes read and let us know what you get. It is probably a P2106.
 
  #3  
Old 01-11-2011, 03:40 PM
2005ford89's Avatar
2005ford89
2005ford89 is offline
New User
Thread Starter
Join Date: Jan 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Thanks alot will do
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stronger
2004 - 2008 F150
46
06-17-2019 03:30 AM
73FOMO
2004 - 2008 F150
1
08-31-2015 10:25 PM
Frankco69
1999 - 2003 7.3L Power Stroke Diesel
5
11-23-2014 11:34 PM
bluiiedgrl
1997-2006 Expedition & Navigator
7
06-03-2013 01:10 PM
MUD BUGGY
2004 - 2008 F150
3
07-10-2006 05:00 PM



Quick Reply: fail safe mode and engine cutting out at high rpms



All times are GMT -5. The time now is 04:45 PM.