Archived Australia Buy/Sell/Trade Ads
#18
For Sale: Rear overload springs for F100
I have these for sale.
From discussion else where on the site they are similar to the original ford overload springs or helper springs.
What you get is:
the springs that's the 2 leafs on each side
the 4 chassis brackets
the 4 u bolts and 16 nuts
the 2 spacers that go between the main springs and the helper springs
They are rusty but nothing a sandblast and powder coat would not fix.
They are on a 1984 4x4 but should fit all leaf spring trucks from 1981 - 1997.
Near Proserpine Qld, happy to freight them but you organise the freight carrier or could deliver between Mackay and Townsville for fuel cost.
$50
Cheers
Ross
From discussion else where on the site they are similar to the original ford overload springs or helper springs.
What you get is:
the springs that's the 2 leafs on each side
the 4 chassis brackets
the 4 u bolts and 16 nuts
the 2 spacers that go between the main springs and the helper springs
They are rusty but nothing a sandblast and powder coat would not fix.
They are on a 1984 4x4 but should fit all leaf spring trucks from 1981 - 1997.
Near Proserpine Qld, happy to freight them but you organise the freight carrier or could deliver between Mackay and Townsville for fuel cost.
$50
Cheers
Ross
#20
sunvisor with clearance lights
WTB
Sunvisor with the clearance lights built into the visor.
I have seen these on mid to late 80's models, I need it for my 88-89 F250.
I have seen a few around, but now I want one I cant find one!!
Sunvisor with the clearance lights built into the visor.
I have seen these on mid to late 80's models, I need it for my 88-89 F250.
I have seen a few around, but now I want one I cant find one!!
#22
WHEELS
G'day Andy,
I've got a full set of 5 16 x 10 (8 x 170 stud pattern) Alloys for sale.
They are a set of Allied Thunder wheels in excellant condition. Caps wheel nuts etc.
PM me if you want me to give you a call.
Cheers,
Reg
I've got a full set of 5 16 x 10 (8 x 170 stud pattern) Alloys for sale.
They are a set of Allied Thunder wheels in excellant condition. Caps wheel nuts etc.
PM me if you want me to give you a call.
Cheers,
Reg
#24
GOT EM
Good to see you got em mate.
Trust they are what you were looking for .
We'll have that beer or three some day.
Cheers,
Reg
#25
WTB 2005 XLT alloy wheel set or single or aftermarket wheels
Hi guys, I have a 2005 F250 XLT super cab 4wd and one of the factory aloy wheels is cracked. Looking to buy either one or a whole set of factory wheels or I would be keen on a set of aftermarket 16 x 8 alloys of some description. Keen to investigate any option.
Cheers,
Pat
Cheers,
Pat
#27
Going to sell my spare engine to fund my gearbox. It's a 2000 model, complete pan to turbo. Had 200k miles on it, was bought as a write off as a runner, but my guy in usa couldn't get started. So was pulled anyway then when I got it, it had a tuner with no start feature. I pulled the inspection plug and it has forged rods. I also have a full rebuild kit, with piston bowls machined by clay and arp head studs. Be perfect to build something like Brian's!!!!
Got and alternater but my mates borrowing it. Has starter, 4x4 computer also
Got and alternater but my mates borrowing it. Has starter, 4x4 computer also