Category: 53-79 F-Series Interior

Replacing Floor Boards In A 1953 F-100

By John Niolon   After I drug my beauty home and rolled it off the trailer I started my survey. At first glance the floorboards looked pretty sound. After I removed the seats and scrapped off the rubber mats, it looked worse than before but still not too bad. After I soda blasted the complete […] More »

  Comments | By - November 13, 2005

1973-1979 Everlasting Steel Glove Box (67-72 similar)

By By Ron Harmsen If you have a mid 70’s Ford Truck chances are that the original pressed fiber glove box is falling apart or maybe even missing. Why pay almost twenty bucks for a new pressed fiberboard glove box when you can make an everlasting mild steel glove box to the exact standards that […] More »

  Comments | By - August 3, 2004

Installing a Mid 80’s GM Bench Seat In a ’53 F-100

By John Niolon After searching the salvage yards and finding a primo set of Caddy 60/40 – 6 way power seats, paying the man and lugging them home, I had a revelation. They look like a sectional sofa in the cab of a truck. These seats are BIG. Plenty comfortable…. Infinitely adjustable… but BIG !! […] More »

  Comments | By - August 3, 2004

1961-1966 Ford F-Series Custom Dash

  By John Thomas Here is a picture of the dash I built for my 1965 Ford. This will work on any years from 1961 thru 1966. First I took the dash apart and got out the plastic piece that will be used (it is neo angle and must be used for the new one, […] More »

  Comments | By - August 3, 2004

  1. 1
  2. 2