Date: Mon, 08 Jan 2001 23:51:47 -0500 (EST)
From: Ford Truck Enthusiasts List Server <listarford-trucks.com>
To: small-list digest users <listarford-trucks.com>
Reply-to: small-listford-trucks.com
Subject: small-list Digest V2001 #5
Precedence: list

==========================================================
Ford Truck Enthusiasts Small Chassis Truck Mailing List

Visit our  web site: http://www.ford-trucks.com

To unsubscribe, send email to: listarford-trucks.com with
the words "unsubscribe small-list" in the subject  of  the
message.
==========================================================

------------------------------------
small-list Digest Mon, 08 Jan 2001 Volume: 2001  Issue: 005

In This Issue:
Re: ODB II question
Re: alignment success

----------------------------------------------------------------------

From: "David Cooley" <n5xmttriad.rr.com>
Subject: Re: ODB II question
Date: Mon, 8 Jan 2001 10:11:34 -0500


I used to pull the battery cable off, but then bought the scanner at
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.obd-2.com/
It's a great unit, hooks to the serial port on a laptop computer and the
software has free updates all the time...
Just connect it up, and click on erase codes.


> -----Original Message-----
> From: small-list-bounceford-trucks.com
> [mailto:small-list-bounceford-trucks.com]On Behalf Of Joe M
> Sent: Friday, January 05, 2001 9:14 PM
> To: small-listford-trucks.com
> Subject: [small-list] Re: ODB II question
>
>
>
> David
>
> Is that what you normally do?  I can see why Ford would put a stupid code
> for this, especially in NJ here were we can't pump our own gas and we have
> stupid kids who don't care how they close your cap.
>
> -----Original Message-----
> From: small-list-bounceford-trucks.com
> [mailto:small-list-bounceford-trucks.com]On Behalf Of David Cooley
> Sent: Thursday, January 04, 2001 8:28 PM
> To: small-listford-trucks.com
> Subject: [small-list] Re: ODB II question
>
>
>
> http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.obd-2.com/
> or pull the battery cable off for a minute or so.
>
>
> -----Original Message-----
> From: small-list-bounceford-trucks.com
> [mailto:small-list-bounceford-trucks.com]On Behalf Of Joe M
> Sent: Thursday, January 04, 2001 8:26 PM
> To: small-listford-trucks.com
> Subject: [small-list] ODB II question
>
>
>
> Does any one know of a ODB II tool I can use on my 99 Ranger to reset the
> code when my fuel cap is not installed properly.  I am getting tired of
> taken to ford and having them reset the code.
>
>
>
>


------------------------------

From: Dukedad777aol.com
Date: Mon, 8 Jan 2001 22:49:23 EST
Subject: Re: alignment success


Well folks , a bit of persistance and your input paid off.  After getting it
back from the second alignment attempt at the same shop with a straightened
steering wheel but still a pronounced pull to the right, I had the front
wheels swapped right to left and now she goes down the road nice and
straight.

Dave Woodhouse

------------------------------

End of small-list Digest V2001 #5
*********************************
----------------------------------------------------------
Ford  Truck  Enthusiasts  Small Chassic Truck Mailing List
Covering the Ranger, Bronco II, Exploer and Aerostar

Send posts to small-listford-trucks.com

If  you  ever  want  to  remove yourself from this mailing
list, send an email to:

listarford-trucks.com

with  the words "unsubscribe small-list" in the subject of
the message.

Visit Our Web Site: http://www.ford-trucks.com
----------------------------------------------------------

ENDTAG; } ?>