Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list small-list); Wed, 31 May 2000 17:28:52 -0400 (EDT)
Date: Wed, 31 May 2000 17:28:52 -0400 (EDT)
From: Ford Truck Enthusiasts List Server>
To: small-list digest users>
Subject: small-list Digest V2000 #79
Precedence: bulk

Ford Truck Enthusiasts Small Chassis Truck Mailing List

Visit our web site:

To unsubscribe, send email to: with
the words "unsubscribe small-list" in the subject of the

small-list Digest Wed, 31 May 2000 Volume: 2000 Issue: 079

In This Issue:
High temp paint: necessary?


From: "Greg Hopper">
Subject: High temp paint: necessary?
Date: Wed, 31 May 2000 17:26:16 -0500

Hey guys, I got a question about high temp paints.
Truck is a 94 4.0L SC, in Electric Currant Red.
I want to paint some miscellaneous underhood pieces, preferably body color (throttle cable bracket, etc.). I was wondering if anybody knows at what point high temp paint is necessary. I can get the dupli-color stuff at Auto Zone, I know it isn't the best but for the brackets and such I think it would work fine. Anyway, obviously I can't get high temp stuff in that color. So if it's necessary, maybe would it work if I used a high-temp primer or other base coat, or maybe a high temp clear coat over it, or maybe both?? Or will I need to select some generic color that is available in high-temp??


End of small-list Digest V2000 #79
Ford Truck Enthusiasts Small Chassic Truck Mailing List
Covering the Ranger, Bronco II, Exploer and Aerostar

Send posts to

If you ever want to remove yourself from this mailing
list, send an email to:

with the words "unsubscribe small-list" in the subject of
the message.

Visit Our Web Site:

ENDTAG; } ?>