pre61-list-digest Saturday, January 23 1999 Volume 03 : Number 020



=======================================================================
Ford Truck Enthusiasts - 1948 - 1948 truck and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre61 - A Note on 6 Volts to 12
FTE Pre61 - Re: YBlock and Tranny suggestions
FTE Pre61 - rear ends

=======================================================================

----------------------------------------------------------------------

Date: Fri, 22 Jan 1999 06:46:50 -0500
From: The Neighbors
Subject: FTE Pre61 - A Note on 6 Volts to 12

If you leave the stock 6 volt heater blower in place it will sound like
an Electrolux when you turn it on!! I put a heavy-duty voltage drop on
the circuit for the heater blower, which I purchased from J.C. Whitney.
I regret I can't tell you for certain how well it works yet, since my
truck's engine is scattered all over my workbench, making it REALLy hard
to drive right now.
- --
Don Neighbors
'54 F250 Named Grover

"Any dropped tool or part will automatically fall into the most
innaccesible part of the vehicle."

groverford-trucks.com
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 22 Jan 1999 11:38:50 PST
From: "Andy Vandergrift"
Subject: FTE Pre61 - Re: YBlock and Tranny suggestions

Well, I am going to be on my way to rebuild the YBlock - it's a good
engine anyways. BUT - what would you suggest for a tranny? It has the
original BorgW 2 speed automatic. I could put in a three speed but I am
not interested in cutting up the floor and getting a clutch assy. Any
ideas????? This is my daily driver.

______________________________________________________
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 22 Jan 1999 22:22:33 -0800 (PST)
From: David Stokes
Subject: FTE Pre61 - rear ends

I have seen a quite of few postings regarding rear ends. I also have the
dilema. The guy I bought my 56 from put a Ch*** rear end on the truck and
I would like to replace it with a 9 inch. Can anybody out there provide a
list of models and years that had 9 inch rear ends that will bolt right
up. I also understand that there are several cars that also had these
types of rear ends. If this is true please provide a list of those cars
and years also. This list would be of great help in the salvage yard.

Thanks for the list and Keep up the good work

Technically challenged 56

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V3 #20
*******************************

+- Ford Truck Enthusiasts - 1948 - 1960 Trucks and vans --------------+
| Send posts to pre61-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

ENDTAG; } ?>