>From kpayneford-trucks.com Fri Oct 2 06:11:46 1998
Date: Fri, 2 Oct 1998 06:11:46 -0400 (EDT)
From: owner-pre61-list-digestford-trucks.com (pre61-list-digest)
To: pre61-list-digestford-trucks.com
Subject: pre61-list-digest V2 #275
Reply-To: pre61-listford-trucks.com
Sender: owner-pre61-list-digestford-trucks.com


pre61-list-digest Friday, October 2 1998 Volume 02 : Number 275



=======================================================================
Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

RE: FTE Pre61 - Stock Seat 55 F100
FTE Pre61 - PS bracket & pump for 56 F-100

=======================================================================

----------------------------------------------------------------------

Date: Thu, 1 Oct 1998 07:56:13 -0400
From: "Howard Tarnoff"
Subject: RE: FTE Pre61 - Stock Seat 55 F100

Yes please. The seat should be two tone. The pattern I refer to is
actually the pattern of the grain in the material itself.

- -----Original Message-----
From: owner-pre61-listford-trucks.com
[mailto:owner-pre61-listford-trucks.com] On Behalf Of Byron Rosbrugh
Sent: Wednesday, September 30, 1998 9:12 PM
To: pre61-listford-trucks.com
Subject: Re: FTE Pre61 - Stock Seat 55 F100

Howard, in followup to our discussions, I looked at the 55 and it appears
that both parts of the seat may have been recovered. It is all vinyl, no
fabric or pattern. I am assuming it has been redone. Do you want me to
investigate further? I can definitely get samples if you want. Let me
know. Byron

- ----------
> From: Howard Tarnoff
> To: pre61-listford-trucks.com
> Subject: Re: FTE Pre61 - Stock Seat 55 F100
> Date: Wednesday, September 23, 1998 8:36 AM
>
> Thanks Byron,
>
> If it looks stock please take detail photos showing the overall all
design, any
> pleats, pipes between colors, etc. If it is origional it should be open
on the
> back of the seat back and the bottom of the seat bottom. It would be
great if
> the owner would allow you to snip off a piece of the excess material that
is
> typically bunched up in the corners of the back and bottom.
>
> That would make finding the grain match easier.
>
>
>
> Byron Rosbrugh wrote:
>
> > Howard, your problem is very similar to mine with a 56 Custom Cab. The
> > interiors are different between a standard cab and a custom cab. The
best
> > source I could find was the original specifications booklet, "1956 Ford
> > Truck, Specifications, Features Manual" I would assume that there was
one
> > for the 1955 also. I am going to look at a 55 in the next few weeks,
that
> > is supposed to be original, If I find something worthy, I will take
photos.
> > Check with some of the parts and book distributors for the Spec book.
I
> > would be interested to find a more reliable and informative option, so
if
> > you get something solid, let me know. Byron in KC
> >
> > ----------
> > > From: Howard Tarnoff
> > > To: pre61-listford-trucks.com
> > > Subject: FTE Pre61 - Stock Seat 55 F100
> > > Date: Tuesday, September 22, 1998 5:21 PM
> > >
> > > The only cosmetic variance I have on my 55 F100 is the seat covering.
> > > The winter will be here all too soon and I plan on redoing this as a
> > > snow bound project. I have checked with LeBaron Bonnie and ABC
> > > Interiors and they are clueless as to what the actual was on a 55.
> > >
> > > I hope that someone on the list has hard facts;
> > >
> > > We would be more than happy to reimburse for the expense of
photograps
> > > that show the detail of the grain and trim style.
> > >
> > > Thanks in advance,
> > > Howard
> > >
> > > == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
> > == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
>
>
>
> == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 1 Oct 1998 14:17:04 EDT
From: Lookn4ironaol.com
Subject: FTE Pre61 - PS bracket & pump for 56 F-100

In recent days there have been some postings concerning power assisted
steering on early trucks. AToyota PS Pump was suggested. I have deleted
those postings so I will post to the list FYI. While browsing the
October "Cruising News" I noticed the following classified ad which might
be of interest to those earlier posters.

"...56 Ford F-100 Powers Steering Bracket from Bob's F-100's and Toyoto
4 x 4 pump, $175 obo. Ian, 916-632-9855"
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V2 #275
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+
| Send posts to pre61-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

ENDTAG; } ?>