pre61-list-digest Friday, July 31 1998 Volume 02 : Number 213



=======================================================================
Ford Truck Enthusiasts - 1960 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe pre61-list-digest" in the body of the
message.
=======================================================================
In this issue:

RE: FTE Pre61 - Carlisle and YBlock engine color!!!
FTE Pre61 - Front end
FTE Pre61 - Heater Core

=======================================================================

----------------------------------------------------------------------

Date: Thu, 30 Jul 1998 08:15:56 -0400
From: "Tarnoff, Howard"
Subject: RE: FTE Pre61 - Carlisle and YBlock engine color!!!

Rich,

Please send a fax # or mailing address.

Howard

> -----Original Message-----
> From: Rich Garber [SMTP:rgarberpressenter.com]
> Sent: Wednesday, July 29, 1998 6:03 PM
> To: pre61-listford-trucks.com
> Subject: Re: FTE Pre61 - Carlisle and YBlock engine color!!!
>
> Howard and his wife and to see his immaculate
> >truck! I don't know what the judges were looking for but I heard more
> >comments about Howard's truck than any other in the competition!
>
> Howard,
>
> Still waiting for some feedback on the judging, points, what they
> took off for, what they were looking for, etc.
>
> Thanks,
>
> Rich
> 54 F100
> == FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 30 Jul 1998 21:38:13 -0500
From: Ted Hanes
Subject: FTE Pre61 - Front end

I recently purchased a 56 Big Window with a Cordova/Volare front clip
and powered by a 501 Cad. Pretty heavy up front and would like to beef
up the front end.

I was told some police departments used Dodge and Plymouths with this
front end that were beefed up with stiffer components (torsion bars,
etc.).

Would like to hear from any one who knows this or a better way to hold
up the Cad.

Ted
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Thu, 30 Jul 1998 22:43:09 -0400
From: "Don & Teresa Neighbors"
Subject: FTE Pre61 - Heater Core

Tom Happel wrote: "Where is a good source for heater cores?"
I received a horrible shock a couple of weeks ago when I priced a "recore"
for Grover's heater. They are not cheap any more!!! I paid $35 for one a
few years back, and the same job is going to set me back at least $80 this
time!!! However, Roy Hall Radiator Service, (606)255-6880 in Lexington, KY
is doing mine, and I know he just ordered the correct size stock, because
he had to special order it for mine. He's been fixing radiators since the
internal combustion engine was invented.
I haven't gotten mine back from him yet, but I expect a really good job.

Don Neighbors
'54 F250 Named Grover

"Any dropped tool or part will automatically fall into the most
innaccesible part of the vehicle."

kyneighborskih.net


== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of pre61-list-digest V2 #213
********************************

+- Ford Truck Enthusiasts - Ranger, Explorer, Bronco 2 and Aerostar --+
| Send posts to pre61-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+
ENDTAG; } ?>