Return-Path:
Date: Fri, 13 Feb 1998 03:50:17 -0700 (MST)
From: owner-fordtrucks-digestListService.net (fordtrucks-digest)
To: fordtrucks-digestListService.net
Subject: fordtrucks-digest V2 #39
Reply-To: fordtrucksListService.net
Sender: owner-fordtrucks-digestListService.net


fordtrucks-digest Friday, February 13 1998 Volume 02 : Number 039



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-requestlistservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Grill of trucks from 48 to 72 [Randall Colgan
302 In 51 [billjhs ]

=======================================================================

----------------------------------------------------------------------

Date: Mon, 17 Nov 1997 14:38:50 -0700
From: Randall Colgan
Subject: Grill of trucks from 48 to 72

I have a picture of the front of all Ford trucks from 48 72 if they're
interested in seeing what each of the years looks like. The Hot link file
is "F101".

URL is below.

Regards,

=======================================
Randall Colgan
University of Alberta
Edmonton, Canada
1952 F-1 Ford Truck
http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.ualberta.ca/~rcolgan/home.html
=======================================

------------------------------

Date: Thu, 12 Feb 1998 19:17:45 -0500
From: billjhs
Subject: 302 In 51

Hello to all and thanks for all the help,

I am in the process of putting a 302 in my 1951 f-1. I am using a
universal motor mount and trans mount. Has anyone had to cut part of the
frame on the passenger side to get it in and doesn;t that put the motor
over to the passenger side of the compartment??? I am having much
difficulty getting this thing in there. Where should the crossmember on
the new motor mount be located, in front or in back of the I beam???
Thanks to all in advance. (I am using an AOD and the bell housing seems
to hit the firewall>>

Bill
1951 f-1

------------------------------

End of fordtrucks-digest V2 #39
*******************************

=======================================================================
Ford Truck Enthusiasts - 1960 and Older
Visit our web site: http://www.ford-trucks.com/
=======================================================================
ENDTAG; } ?>