Return-Path:
Date: Tue, 25 Nov 1997 03:50:17 -0700 (MST)
From: owner-fordtrucks-digestListService.net (fordtrucks-digest)
To: fordtrucks-digestListService.net
Subject: fordtrucks-digest V1 #60
Reply-To: fordtrucksListService.net
Sender: owner-fordtrucks-digestListService.net


fordtrucks-digest Tuesday, November 25 1997 Volume 01 : Number 060



=======================================================================
Ford Truck Enthusiasts - 1960 And Older Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To remove yourself for our list send email to:
fordtrucks-digest-requestlistservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Web page [Dave ]
Brake Questions ["R. Garber" ]
Re: Brake Questions [Art Starkey ]

=======================================================================

----------------------------------------------------------------------

Date: Mon, 24 Nov 1997 18:48:08 -0800
From: Dave
Subject: Web page

I'm sorry for this repeat but I lost my links. I'm looking
for the page that had the production numbers for Merc Pickups.
Thanks..
Dave (53&54 Merc)

------------------------------

Date: Mon, 24 Nov 1997 21:05:05 -0600
From: "R. Garber"
Subject: Brake Questions

>Hello All,
>
>I have a couple of brake line questions. I'm sure everyone has replaced
>the brake lines so here goes. What kind of clips were used to hold the
>line to the frame? I can't seem to find the orignal clips. Also, the gravel
>guards (I think thats what it's called) is it a spring or wire wound around
>the line? Any suggestions as to what I might use? I want it to look like
>it did when it was new and these little things are turning out to be harder
>than I thought.
>
>I'm also looking at the wiring, I know someone out there wrote awhile back
>and had ordered a harness? Any feed back, was it an exact duplcate?
>How much?
>I'm thinking about rewiring it myself but I can't find that cloth covered wire.
>I was thinking about using PVC wire and at the ends, where you would see
>exposed wire to use a good piece of orignal harness crimped and soldered.
>Any comments?
>
>Thanks,
>
>Rich
>54 F100
>
>
>

------------------------------

Date: Mon, 24 Nov 1997 23:07:50 -0800
From: Art Starkey
Subject: Re: Brake Questions

At 09:05 PM 11/24/97 -0600, you wrote:
>
>>Hello All,
>>
>>I have a couple of brake line questions. I'm sure everyone has replaced
>>the brake lines so here goes. What kind of clips were used to hold the
>>line to the frame? I can't seem to find the orignal clips. Also, the gravel
>>guards (I think thats what it's called) is it a spring or wire wound around
>>the line? Any suggestions as to what I might use? I want it to look like
>>it did when it was new and these little things are turning out to be harder
>>than I thought.
>>
>>I'm also looking at the wiring, I know someone out there wrote awhile back
>>and had ordered a harness? Any feed back, was it an exact duplcate?
>>How much?
>>I'm thinking about rewiring it myself but I can't find that cloth covered
wire.
>>I was thinking about using PVC wire and at the ends, where you would see
>>exposed wire to use a good piece of orignal harness crimped and soldered.
>>Any comments?
>>
>>Thanks,
>>
>>Rich
>>54 F100
>>
>>
>>
>
>+-------------- Ford Truck Enthusiasts - 1960 and Older --------------+
>| Send posts to fordtruckslistservice.net, removal form on the web |
>| site. |
>+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+
>
> Rich Check with Dennis Carpenter he carries orignal wireing harneses, may
also be able to help with brake lines.


Art

------------------------------

End of fordtrucks-digest V1 #60
*******************************

=======================================================================
Ford Truck Enthusiasts - 1960 and Older
Visit our web site: http://www.ford-trucks.com/
=======================================================================
ENDTAG; } ?>