Please do not repost, forward or otherwise publish messages
contained in these archives without consent from the respective
author(s). These archives may not, in whole or part, be stored on
any public retrieval system (FTP, web, gopher, newsgroup, etc.) by
individuals or companies, without consent of the respective authors.

Received: with LISTAR (v0.128a; list pre61-list); Sat, 17 Jun 2000 14:40:29 -0400 (EDT)
Date: Sat, 17 Jun 2000 14:40:29 -0400 (EDT)
From: Ford Truck Enthusiasts List Server ford-trucks.com>
To: pre61-list digest users ford-trucks.com>
Reply-to: pre61-listford-trucks.com
Subject: pre61-list Digest V2000 #103
Precedence: bulk

==========================================================
Ford Truck Enthusiasts 1948-1960 Truck Mailing List

Visit our web site: http://www.ford-trucks.com

To unsubscribe, send email to: listarford-trucks.com with
the words "unsubscribe pre61-list" in the subject of the
message.
==========================================================

------------------------------------
pre61-list Digest Sat, 17 Jun 2000 Volume: 2000 Issue: 103

In This Issue:
Fwd: isuzu gas tank

----------------------------------------------------------------------

From: Larrykvetaol.com
Date: Sat, 17 Jun 2000 15:38:50 EDT
Subject: Fwd: isuzu gas tank





-- Attached file included as plaintext by Listar --

Return-path: aol.com>
From: Larrykvetaol.com
Full-name: Larrykvet
Message-ID: <48.6e5cf6c.267d2cfaaol.com>
Date: Sat, 17 Jun 2000 15:35:22 EDT
Subject: Re: isuzu gas tank
To: Larrykvetaol.com
MIME-Version: 1.0
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
X-Mailer: AOL 4.0 for Windows sub 102

I have finally obtained a trooper tank for my 53- I was wondering if someone
who has done this swap would answer some questions- I have read the article
but am trying to avoid problems and save time- what sending unit did you
use- can you use the one on the trooper?- if you don't want to raise the bed
do you use spacers to drop the tank below the bottom frame rail? did you use
the same cross member and just move it to the rear ( it curves toward the
bed) or make a new one that is flat? where did you mount the vapor cannister
from the isuzu? thanks larry



------------------------------

End of pre61-list Digest V2000 #103
***********************************
----------------------------------------------------------
Ford Truck Enthusiasts 1948-1960 Truck List

Send posts to pre61-listford-trucks.com

If you ever want to remove yourself from this mailing
list, send an email to:

listarford-trucks.com

with the words "unsubscribe pre61-list" in the subject of
the message.

Visit Our Web Site: http://www.ford-trucks.com
----------------------------------------------------------

ENDTAG; } ?>