ford-trucks.com (pre48-list-digest)
To: pre48-list-digestford-trucks.com
Subject: pre48-list-digest V2 #94
Reply-To: pre61-listford-trucks.com
Sender: owner-pre48-list-digestford-trucks.com
Errors-To: owner-pre48-list-digestford-trucks.com
Precedence: bulk


pre48-list-digest Monday, September 13 1999 Volume 02 : Number 094



=======================================================================
Ford Truck Enthusiasts - 1947 and Older trucks and vans
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe pre47-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Pre48 - Re:Rearends

=======================================================================

----------------------------------------------------------------------

Date: Sun, 12 Sep 1999 13:44:19 EDT
From: Brechtjohnaol.com
Subject: FTE Pre48 - Re:Rearends

The 1940 3/4 tonner has an open drive shaft. It is a totally difference
beast than the 1/2 ton -- different frame, etc. It is the smallest of the
big-truck line. I don't know if Ford figured it would be pulling bigger
loads than the half ton and maybe that is why they put in the 4.8 and 4.11
rearends in the 3/4 and 1 tonners to compensate for the 85 horsepower
flathead. They speedometer only goes up to 60 on the 3/4 tonner and oppose
the the higher speeds on the 1/2 ton trucks.

John Brecht
Aiken, SC
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of pre48-list-digest V2 #94
*******************************

+- Ford Truck Enthusiasts - 1947 and Older trucks and vans -----------+
| Send posts to pre48-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+ ENDTAG; } ?>