perf-list-digest Saturday, February 6 1999 Volume 02 : Number 030



=======================================================================
Ford Truck Enthusiasts - Performance
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe perf-list-digest" in the body of the
message.
=======================================================================
In this issue:

RE: FTE Perf - LL products
Re: FTE Perf - LL products
Re: FTE Perf - LL products
Re: FTE Perf - LL products
RE: FTE Perf - LL products
FTE Perf - ADMIN: Spring nominations
Re: FTE Perf - LL products

=======================================================================

----------------------------------------------------------------------

Date: Fri, 5 Feb 1999 11:28:26 -0500
From: Sleddog
Subject: RE: FTE Perf - LL products

its an old catalog, but here it is:
214.475.5202
rowlet texas

Although i feel their products are top of the line i did \have to wait
about 6 monthes to receive my 460 into 77 f150 headers several years ago.
it wouldn't have pissed me off much, but they continually told me they
were shipped, will be shipped, etc.

but, like i said many times before on FTE lists, the headers where
excellant once i received them. the motor mounts where good pieces too.
there was is a slight interferance between the header and frame (i got
fenderwell exits) and they told me to bend the header. i was not able to
bend it - the flange and welds are strong, as well as the tubes.

sleddog

- ----------
From: Doug Ridder[SMTP:riddersocket.net]
Sent: Thursday, February 04, 1999 9:41 PM
To: perf-listford-trucks.com
Subject: FTE Perf - LL products

Does anyone know the number to LL products?





== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 5 Feb 1999 10:55:59 -0600
From: "Brian Andrews"
Subject: Re: FTE Perf - LL products

I received a set of headers that I feel were a good deal. They were strong
and had good welds but also had the shipping problem from Total Performance
in Michigan. They were for a 302 in a bronco II. Their motor mounts caused
me a headache though. They sat too low. They could have been a 1/4" higher
on one side and 3/4" higher on driver side and all the "modified components"
could have been eliminated and certain older stock could be used. Which is
what I did. You can see it at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://southeastern.webjump.com/20298.jpg
and at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://southeastern.webjump.com

It's almost ready for the road


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 05 Feb 99 11:20:34 PST
From: "Doug Ridder"
Subject: Re: FTE Perf - LL products

I think this is the number that I had before. At least every time I try =
to call it I get the recording that says to "check the number and try aga=
in".

I even called 214 information and they are not listing anything for LL =
products.

I was wondering if they are still in business? Sold out to someone else?=
Moved? Or if anyone has a newer number for them?

Thanks Doug

- ----------
>
> its an old catalog, but here it is:
> 214.475.5202
> rowlet texas
>
> Although i feel their products are top of the line i did \have to wait =

> about 6 monthes to receive my 460 into 77 f150 headers several years =
ago.
> it wouldn't have pissed me off much, but they continually told me they
> were shipped, will be shipped, etc.
>
> but, like i said many times before on FTE lists, the headers where
> excellant once i received them. the motor mounts where good pieces too=
.
> there was is a slight interferance between the header and frame (i got
> fenderwell exits) and they told me to bend the header. i was not able =
to
> bend it - the flange and welds are strong, as well as the tubes.
>
> sleddog
>
> ----------
> From: Doug Ridder[SMTP:riddersocket.net]
> Sent: Thursday, February 04, 1999 9:41 PM
> To: perf-listford-trucks.com
> Subject: FTE Perf - LL products
>
> Does anyone know the number to LL products?
>
>
>
>
>
> =3D=3D FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq=
.html


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 5 Feb 1999 11:49:57 -0800
From: "Bill Beyer"
Subject: Re: FTE Perf - LL products

According to the latest Petersen's 4WOR the # for L&L is 972-475-8063. The #
to get their catalog is 972-475-5202.

- -----Original Message-----
From: Doug Ridder
To: perf-listford-trucks.com
Date: Friday, February 05, 1999 11:36 AM
Subject: Re: FTE Perf - LL products


>I think this is the number that I had before. At least every time I try to
call it I get the recording that says to "check the number and try again".
>
>I even called 214 information and they are not listing anything for LL
products.
>
>I was wondering if they are still in business? Sold out to someone else?
Moved? Or if anyone has a newer number for them?
>


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 5 Feb 1999 13:51:14 -0600
From: "Baldwin, Dave"
Subject: RE: FTE Perf - LL products

Doug,

They are still in business--I just called. The 214 are code was split
recently, and LL products is now in the 972 area code. Call 972-475-5202.

Regards,
Dave Baldwin
Dallas, TX

- -----Original Message-----
From: Doug Ridder [mailto:riddersocket.net]
Sent: Friday, February 05, 1999 1:21 PM
To: perf-listford-trucks.com
Subject: Re: FTE Perf - LL products


I think this is the number that I had before. At least every time I try to
call it I get the recording that says to "check the number and try again".

I even called 214 information and they are not listing anything for LL
products.

I was wondering if they are still in business? Sold out to someone else?
Moved? Or if anyone has a newer number for them?

Thanks Doug

- ----------
>
> its an old catalog, but here it is:
> 214.475.5202
> rowlet texas
>
> Although i feel their products are top of the line i did \have to wait
> about 6 monthes to receive my 460 into 77 f150 headers several years ago.
> it wouldn't have pissed me off much, but they continually told me they
> were shipped, will be shipped, etc.
>
> but, like i said many times before on FTE lists, the headers where
> excellant once i received them. the motor mounts where good pieces too.
> there was is a slight interferance between the header and frame (i got
> fenderwell exits) and they told me to bend the header. i was not able to
> bend it - the flange and welds are strong, as well as the tubes.
>
> sleddog
>
> ----------
> From: Doug Ridder[SMTP:riddersocket.net]
> Sent: Thursday, February 04, 1999 9:41 PM
> To: perf-listford-trucks.com
> Subject: FTE Perf - LL products
>
> Does anyone know the number to LL products?
>
>
>
>
>
> == FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 05 Feb 1999 16:59:47 -0500
From: Ken Payne
Subject: FTE Perf - ADMIN: Spring nominations

Fellow FTEs:

Once again, Car Lounge is taking nominations for their
top ten automotive sites awards. FTE has, thanks to
its members, consistantly won a top 10 award.

Last quarter something shameful happened: FTE won second
place... Chevy's corporate site won first place.

If you like FTE's site and services, please take a
couple of moments to nominate us.

The nomination form can be found at:

http://www.ford-trucks.com//lc/lc.php?action=do&link=http://carlounge.com/nominate.htm

Thanks,
Ken Payne
FTE Admin


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Fri, 05 Feb 1999 20:14:59 -0600
From: "Robert F. Davis"
Subject: Re: FTE Perf - LL products

At 11:20 AM 02/05/99 PST, you wrote:

Hey Guys,

As far as I know L & L Products is still in business.

On pg.85 of the Nov issue of Super Ford Magazine
they have an ad.

Whats happened is a bunch of the area codes around Dallas/Ft Worth &
Houston changed last year.

Their new number is: 972-475-5205

fax # is 972-475-8063

Their address is: 3210 Century Drive

Rowlett, TX 75088

Only the heart of Dallas got to keep the 214 area code.

Some of the new phone books still don't have their area maps correct

Waco (where I am lost the 817ac), only Ft Worth now has the 817 AC.

Wacko's new area code is 254, just FYI.

Hope this helps...


"Beater" Bob Davis


>I think this is the number that I had before. At least every time I try
to call it I get the recording that says to "check the number and try
again".

>

>I even called 214 information and they are not listing anything for LL
products.

>

>I was wondering if they are still in business? Sold out to someone
else? Moved? Or if anyone has a newer number for them?

>

>Thanks Doug

>

>----------

>>

>> its an old catalog, but here it is:

>> 214.475.5202

>> rowlet texas

>>

>> Although i feel their products are top of the line i did \have to wait

>> about 6 monthes to receive my 460 into 77 f150 headers several years
ago.

>> it wouldn't have pissed me off much, but they continually told me
they

>> were shipped, will be shipped, etc.

>>

>> but, like i said many times before on FTE lists, the headers where

>> excellant once i received them. the motor mounts where good pieces
too.

>> there was is a slight interferance between the header and frame (i
got

>> fenderwell exits) and they told me to bend the header. i was not able
to

>> bend it - the flange and welds are strong, as well as the tubes.

>>

>> sleddog

>>

>> ----------

>> From: Doug Ridder[SMTP:riddersocket.net]

>> Sent: Thursday, February 04, 1999 9:41 PM

>> To: perf-listford-trucks.com

>> Subject: FTE Perf - LL products

>>

>> Does anyone know the number to LL products?

>>

>>

>>

>>

>>

>> == FTE: Uns*bscribe and posting info
http://www.ford-trucks.com/faq.html

>

>

>
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of perf-list-digest V2 #30
******************************

+--------------- Ford Truck Enthusiasts - Performance ----------------+
| Send posts to perf-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

ENDTAG; } ?>