perf-list-digest Monday, November 23 1998 Volume 01 : Number 150



=======================================================================
Ford Truck Enthusiasts - Performance
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe perf-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Perf - 300-6 valve covers
RE: FTE Perf - 300-6 valve covers
FTE Perf - Re inside runners which hold the glass inside the 79 Bronco tailgate.
Re: FTE Perf - Re inside runners which hold the glass inside the 79 Bronco tailgate.
FTE Perf - ADMIN: 1999 F-100 Supernationals, Pigeon Forge

=======================================================================

----------------------------------------------------------------------

Date: Sat, 21 Nov 1998 17:58:35 -0600
From: Neal DePape
Subject: FTE Perf - 300-6 valve covers

I have a 1968 Mercury truck with a Ford 300 cubic inch six cylinder in
it. I would like to install a set of crane rockers I bought used, but
they don't fit under the stock valve cover. Does anyone know of a
taller valve cover for this motor? Stock preferred, but aftermarket
would do.

Neal

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sat, 21 Nov 1998 19:35:28 -0500
From: Sleddog
Subject: RE: FTE Perf - 300-6 valve covers

cliffords may have one that would work. two other choices would be to
raise it up using a machined aluminum piece, or to cut the stock sheetmetal
one above the flange and weld a section in the middle of it.

sleddog

- ----------
From: Neal DePape[SMTP:nealdpmn.mediaone.net]
Sent: Saturday, November 21, 1998 6:58 PM
To: perf-listford-trucks.com
Subject: FTE Perf - 300-6 valve covers

I have a 1968 Mercury truck with a Ford 300 cubic inch six cylinder in
it. I would like to install a set of crane rockers I bought used, but
they don't fit under the stock valve cover. Does anyone know of a
taller valve cover for this motor? Stock preferred, but aftermarket
would do.

Neal

== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html




== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 22 Nov 1998 06:49:39 -0500
From: "Mr. Paul R. Boudreault"
Subject: FTE Perf - Re inside runners which hold the glass inside the 79 Bronco tailgate.

Hi Everyone.

Anyone know where I can get a pair of these runners? They guide the glass
as it goes in and out of the tailgate on the 79 Bronco. It goes without
saying that FORD ain't got them anymore. I haven't seen them in any of the
parts books for aftermarket I have either.

Looks like used is my only option, (aside from making them myself, which I
would rather not).

If anyone can help let me know.

Thanks

"Paul"


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 22 Nov 1998 11:29:13 MST
From: "Gear Guru"
Subject: Re: FTE Perf - Re inside runners which hold the glass inside the 79 Bronco tailgate.

Paul,
is it possible that you could find a set of these runners in a
late model bronco or maybe even a blazer that would work in your bronco?
(80-97) If and when you do please let me know where you got them , i may
need them some day too.
AZ Eric
'79 Bronco custom 4x4, 400M
a4wheelin_mudderhotmail.com

______________________________________________________
== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

Date: Sun, 22 Nov 1998 15:16:31 -0500
From: Ken Payne
Subject: FTE Perf - ADMIN: 1999 F-100 Supernationals, Pigeon Forge

The 21st annual F-100 Supernations, in Pigeon Forge, Tennessee,
is scheduled for May 13-16, 1999 at the Grand Hotel.

This show features both old and new trucks and is the largest
show of its kind. Last year, over 800 trucks were registered
in the show. Ford Truck Enthusiasts had very good attendance,
especially since it was our first year. We had 32 people (not
including spouses) from our group there. Already we are nearly
double the size we were in April of 98. We're hoping to have
over 100 people attend in 1999.

As many of you may know, several of us are trying to incorporate
a non-profit Ford truck club. We hope to have this together
by the show. Regardless of whether or not this happens by then,
we'd like to put together a committee to plan for the event.

If you would like to be part of the planning, and/or you plan to
attend the show, you can be on this committee by sending an
email to majordomoford-trucks.com with the following in the
body of the email:

subscribe pfgroup-listford-trucks.com

This is the only way to subscribe.

Full information about the show will appear on the web site events
guide this evening.

Regards,
Ken Payne
CoAdmin, Ford Truck Enthusiasts


== FTE: Uns*bscribe and posting info http://www.ford-trucks.com/faq.html

------------------------------

End of perf-list-digest V1 #150
*******************************

+--------------- Ford Truck Enthusiasts - Performance ----------------+
| Send posts to perf-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

ENDTAG; } ?>