perf-list-digest Thursday, September 17 1998 Volume 01 : Number 091



=======================================================================
Ford Truck Enthusiasts - Performance
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
majordomoford-trucks.com
with the words "unsubscribe perf-list-digest" in the body of the
message.
=======================================================================
In this issue:

FTE Perf - Re: Springs
FTE Perf - Re: shocks

=======================================================================

----------------------------------------------------------------------

Date: Wed, 16 Sep 1998 08:48:28 -0500
From: Erik
Subject: FTE Perf - Re: Springs

actually its possible but the ride would not be much better with such a
heavy body.
I considered using airbags and coilsprings on my Ranger
($499 kit for air bags and then the coil konis were a few hundred)
but it wouldnt really ride that much better for the probally $2000
invested in & getting them installed.....

I did invest in huge sway bars and stiffer springs in the front to
counter the
V8 weight i put on it..

just my 2 cents
Erik
ps.. im taking the ranger on a 4000 mile test drive to see how
everything
works this week :) so i will be back in a week

== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

Date: Wed, 16 Sep 1998 11:11:52 -0500
From: lordjanuszjuno.com (Paul M Radecki)
Subject: FTE Perf - Re: shocks

>> Andrew Chung writes: >>I'm looking to replace all four shock
>absorbers
>on
>> my '98 Explorer. The body sways too much in turns and the rebound
>from
>the
>> factory shocks is too stiff.
>>
>> You might want to try a rear stabilizer bar. This is the best
>method of
>> keeping the vehicle from "swaying". Will stiffen the ride even more
>> though!.!.!.!.
>
You might try the Edelbrock shocks alone, before you add the sway
bar. They are designed to reduce body roll already, so the sway bar
might prove to be redundant. I've been trying to get an answer from the
source (edelbrockedelbrock.com) but no reply yet. I am following this
thread with interest because my '94 F150 needs some suspension upgrades,
so please post the result of your modifications. Thanks!

lordjanuszjuno.com

"The beatings will continue until morale improves..."

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.ford-trucks.com//lc/lc.php?action=do&link=http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
== FTE: Uns*bscribe and posting info www.ford-trucks.com/faq.html

------------------------------

End of perf-list-digest V1 #91
******************************

+--------------- Ford Truck Enthusiasts - Performance ----------------+
| Send posts to perf-listford-trucks.com, |
| List removal information is on the web site. |
+---------- Visit Our Web Site: http://www.ford-trucks.com/ ----------+

ENDTAG; } ?>