Return-Path:
Date: Fri, 23 Jan 1998 11:36:01 -0700 (MST)
From: owner-fordtrucks61-79-digestListService.net (fordtrucks61-79-digest)
To: fordtrucks61-79-digestListService.net
Subject: fordtrucks61-79-digest V2 #36
Reply-To: fordtrucks61-79ListService.net
Sender: owner-fordtrucks61-79-digestListService.net


fordtrucks61-79-digest Friday, January 23 1998 Volume 02 : Number 036



=======================================================================
Ford Truck Enthusiasts - 1961-1979 Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks61-79-digest-requestlistservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

No exhaust [am14chrysler.com]

=======================================================================

----------------------------------------------------------------------

Date: Fri, 23 Jan 1998 13:35:21 -0500
From: am14chrysler.com
Subject: No exhaust

Brian: Do not run it long enough to heat the valves. When you shutr
it down the ones left open have a tendacy to warp because they cool so
quickly from being open to the fresh air.

>>Next question...Is it ok to run the new motor with no exhaust...
Not even manifolds...when I first start it up ??

It's ok to start it and shut it right back off, but not to run it for
any length of time.

Azie

------------------------------

End of fordtrucks61-79-digest V2 #36
************************************

=======================================================================
Ford Truck Enthusiasts 1961-1979
Visit our web site: http://www.ford-trucks.com/
=======================================================================
ENDTAG; } ?>