Return-Path:
Date: Sun, 2 Nov 1997 03:50:19 -0700 (MST)
From: owner-fordtrucks61-79-digestListService.net (fordtrucks61-79-digest)
To: fordtrucks61-79-digestListService.net
Subject: fordtrucks61-79-digest V1 #328
Reply-To: fordtrucks61-79ListService.net
Sender: owner-fordtrucks61-79-digestListService.net


fordtrucks61-79-digest Sunday, November 2 1997 Volume 01 : Number 328



=======================================================================
Ford Truck Enthusiasts - 1961-1979 Trucks Digest
Visit our web site: http://www.ford-trucks.com/
- - - - - - - - - - - - - - - - - - - - - - -
To unsubscribe, send email to:
fordtrucks61-79-digest-requestlistservice.net
with the word "unsubscribe" in the body of the message. For help, send
email to the same address with the word "help" in the body of the
message.
=======================================================================
In this issue:

Re: FE390 [danadebpacbell.net]

=======================================================================

----------------------------------------------------------------------

Date: Sat, 01 Nov 1997 23:16:30 -0800
From: danadebpacbell.net
Subject: Re: FE390

A while back I looked at the Ponycar ( or something like that ) page and
it said something about the flange width ( didn't book mark but it was
the page that had info about the motorcraft/autolite carb )

------------------------------

End of fordtrucks61-79-digest V1 #328
*************************************

=======================================================================
Ford Truck Enthusiasts 1961-1979
Visit our web site: http://www.ford-trucks.com/
=======================================================================
ENDTAG; } ?>