Click for full size image

Here is the passenger side shot with the side mount spare in pla ...

Click for full size image

Here's a nice clean drivers side shot. ...

Click for full size image

Here is the passenger side pretty much reassembled. I had the un ...

Click for full size image

Here's the bedwood installed with that nice Cherry finish. With ...

Click for full size image

Here is the tailgate in place, and the rear roll pan with the li ...

Click for full size image

I've had all the folks who helped in building this truck sign th ...

Click for full size image

Here is the cab back on the frame. The engine and C-4 Trans rein ...

Click for full size image

Heres the tailgate and out fabricated rear roll pan and license ...

Click for full size image

I moved the battery from under the hood to under the seat. Also ...

Click for full size image

Here's a pic of the rebuilt and converted Flattie. From extended ...

Click for full size image

Here's the finished bedwood. This truck had the factory steel fl ...

Click for full size image

Rebuilt C-4 from a '68 Ford Mustang. ...

Click for full size image

Front sheetmetal and Radiator removed. Old spring off, trial fit ...

Click for full size image

8" rear end out of a '79 Ford Granada reworked and ready for a n ...

Click for full size image

12 Volt Conversion, a little engine paint, Offenhauser intake, d ...

Click for full size image

New Billet insert Filled with New VDO Guages. Old Guage package ...

Click for full size image

Here's the beginnings of installing a new Painless Performance w ...

Click for full size image

One nice thing about the hood latch.....it's makes a great place ...

Click for full size image

Talk about creating guilt ! Every day I looked out my living roo ...

Click for full size image

Here's the '41 the day I bought it ! Had been setting in a wareh ...