Technical Service Bulletins
|Publication Date: August 24, 2004|
|2003-2004 Excursion, F-Super Duty|
Some 6.0L equipped vehicles may exhibit a hard start or no start condition due to a glow plug control module (GPCM) connector.
Inspect the GPCM connectors for pin related concerns such as pin fit, pull out, bending, corrosion, etc. If a concern is found, replace the green or black GPCM connector using the new GPCM connector service kit. The kit contains an instruction sheet and a replacement connector with a pigtail that can be spliced into the existing harness. If no pin related concerns are present, proceed with normal diagnosis.
|PART NUMBER||PART NAME|
|4C3Z-12B568-AA||GPCM Connector Kit|
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
|041713A||Inspect The GPCM Connectors And Replace The Green Connector (Includes Time To Perform A Pin To Pin Continuity Check)||1.7 Hrs.|
|041713B||Inspect The GPCM Connectors And Replace The Black Connector (Includes Time To Perform A Pin To Pin Continuity Check And Access The ICP Sensor)||2.1 Hrs.|
|041713C||Inspect The GPCM Connectors And Replace Both Connectors (Includes Time To Perform A Pin To Pin Continuity Check And Access The ICP Sensor)||2.9 Hrs.|
|BASIC PART NO.||CONDITION CODE|