Technical Service Bulletins
|Publication Date: October 6, 2003|
|1995-1996 E-350, F SUPER DUTY, F-250, F-350|
Article 96-17-19 is being republished in its entirety as part of a consolidated 7.3L diagnostic aid booklet, and to update part information and vehicle criteria.
The Front End Accessory Drive (FEAD) belt may wear, shred and/or come off during deceleration.
Replace the belt tensioner and the FEAD belt. Refer to the following Service Procedure for details.
- Inspect the belt for rear edge belt wear and move the tensioner arm to see if it can be cocked out of position.
- Check for a sticking or binding tensioner by moving the tensioner through its full travel.
- If any of these conditions exist, replace the belt tensioner following the procedure outlined in the appropriate model/year Service Manual.
|PART NUMBER||PART NAME|
|F6TZ-8620-GA||Front End Accessory Drive (FEAD) Belt|
OTHER APPLICABLE ARTICLES: