Technical Service Bulletins
|Publication Date: September 22, 2005|
|1999-2006 E-Series, F-Super Duty|
2000-2006 F-650, F-750
This article supersedes TSB 03-21-46 to update the affected engines and vehicle model years.
Some vehicles equipped with the 7.3L or 6.0L Diesel Engine may exhibit engine oil pan corrosion when operated in high salt content/corrosive environments. If the customer is concerned with this cosmetic issue, the following procedure may be used to resolve the condition.
Inspect the oil pan. If corrosion is detected use Motorcraft High Temp Anti-Corrosion Coating, Part Number PM-13-A, to service. Refer to the following Service Procedure for details.
Clean the oil pan off with a solvent to remove any dirt and oil. Using a 3″ angle grinder with a 36 grit disc, grind off all loose corrosion. Blow off with air. Wash the pan with soap and water and let dry. Brush the anti-corrosion coating on the oil pan. Allow coating to dry fully before operating the vehicle.
|PART NUMBER||PART NAME|
|PM-13-A||Motorcraft High Temp Anti-Corrosion Coating|
Information Only – Not Warrantable