Technical Service Bulletins
|Publication Date: December 7, 2005|
2005-2006 F-Super Duty
Some 2005-2006 F-Super Duty and 2005 Excursion vehicles may exhibit a warped or wavy front bumper cover (molding).
Follow the instructions provided in the Bumper Cover Kit to eliminate the warped/wavy condition of the front bumper cover.
|PART NUMBER||PART NAME|
|6C3Z-17C882-A||Bumper Cover Kit|
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
|052511A||2005-2006 F-250-F-350, 2005 Excursion: Install Bumper Cover Kit (Do Not Use With 17957A, 17757A)||0.9 Hr.|
|052511B||2005-2006 F-450-F-550: Install Bumper Cover Kit (Do Not Use With 17957A, 17757A)||1.1 Hrs.|
|BASIC PART NO.||CONDITION CODE|
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by “do-it-yourselfers”. Do not assume that a condition described affects your car or truck. Contact a Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supercede this information with updates. The most recent information is available through Ford Motor Company’s on-line technical resources.
Copyright © 2005 Ford Motor Company