Technical Service Bulletins
|Publication Date: NOVEMBER 14, 2000|
|1999-2000 SUPER DUTY F SERIES|
This article applies only to 1999-2000 Super Duty F-Series vehicles equipped with a 6.8L or 7.3L engine built 1/5/1998 through 2/6/2000, and 2000 model Excursion vehicles equipped with a 6.8L or 7.3L engine built 7/1/1999 through 2/6/2000.
Some vehicles, equipped with 4R100 transmissions, built prior to 2/6/2000 may benefit from additional cooling during heavy duty use conditions (i.e., snow plowing, towing, carrying heavy loads.) A revised transmission Fluid Filter/Cooling Kit has been developed to aid in fluid cooling.
Replace radiator, cooler lines, and hoses for transmission fluid cooling system with current level parts on vehicles built prior to 2/6/2000, ONLY WHEN transmission hardware confirms customer condition of inadequate transmission cooling. Refer to the following Service Procedure for details.
If vehicle requires service, repair any transmission damage as required.
If inadequate transmission cooling is suspect:
- Replace radiator, cooler lines, and hoses with current level parts. The radiator has an internal transmission fluid cooler.
- For removal, refer to appropriate model/year Workshop Manual.
- For installation, follow procedures listed in the appropriate model 2001 Workshop Manual.
Once the transmission fluid cooling system has been updated, install the Transmission In-Line Filter Kit (XC3Z-7B155-AA) per TSB 00-23-10. Follow the instructions included with the filter service kit.
|PART NUMBER||PART NAME|
|YC3Z-7N291-AA||Clip – Transmission Oil Cooler|
|XC3Z-7B155-AA||Filter Kit – Transmission In-Line|
OTHER APPLICABLE ARTICLES: