Fulltext TSBs

Technical Service Bulletins

TSB
99-1-10
  • ENGINE – NEW DESIGN ENGINE BLOCK FOR SERVICE – 7.0L AND 7.5L ENGINES
Publication Date: JANUARY 12, 1999

LIGHT TRUCK:
1990-1996 ECONOLINE, F SUPER DUTY, F-250, F-350
MEDIUM/HEAVY TRUCK:
1990-1998 F-600, F-700, F-800

This TSB article is being republished in its entirety to include vehicles through the 1998 model year and to include a Note.

ISSUE:

A new design engine block for 7.0L and 7.5L engines has been released for service. There is now one (1) common block for both applications.

ACTION:

If replacement of the engine block on the 7.0L or 7.5L engine is necessary, replace the block with the new design Engine Block (F6TZ-6010-GA). The oil pump pickup screen stud must be in the proper location. Refer to Figure 1 and Figure 2 for the correct location differences between 7.5L Econoline/F-Series and 7.0L Medium Duty vehicles. The removal and installation procedures will remain the same.

NOTE:THE MAIN BEARING STUD BOLTS WILL NEED TO BE REMOVED FROM THE OLD BLOCK AND INSTALLED IN THE NEW BLOCK.


PART NUMBERPART NAME
F6TZ-6010-GAEngine Block – 7.0L/7.5L

OTHER APPLICABLE ARTICLES:

NONE

SUPERSEDES:

96-1-9

WARRANTY STATUS:

Information Only

OASIS CODES:

499000




Figure 1 – Article 99-1-10




Figure 2 – Article 99-1-10


Copyright 1999 Ford Motor Company