Technical Service Bulletins
|Publication Date: NOVEMBER 10, 1997|
|1989-1997 F-53 MOTORHOME|
This TSB article is being republished in its entirety to include the latest level parts.
A new turbine style fuel pump and sender is available. The new turbine style has a 4-pin connector and will not work with the 3-pin heart-shaped connector on vehicles without using a jumper.
When installing a new turbine style fuel pump on a vehicle, a Jumper Harness Kit is required to install the fuel pump and sender. Refer to the Parts Block for proper part usage and Instruction Sheets, included in the kits, for installation details.
|PART NUMBER||PART NAME|
|F6PZ-9H307-DA||Fuel Pump And Sender Assembly|
|F7PZ-9A213-BA||Jumper Harness Kit (Vehicles Built Before 11/26/96 – 3 Wire)|
|F7PZ-9A213-CA||Jumper Harness Kit (Vehicles Built After 11/26/96 – 4 Wire)|
|F5AZ-14A099-AA||Heat Shrink Tubing|
OTHER APPLICABLE ARTICLES:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
|972309A||Replace Fuel Pump And Install Jumper Harness||1.6 Hrs.|
|BASIC PART NO.||CONDITION CODE|
203000, 203200, 404000
Copyright © 1997 Ford Motor Company